New to this site and my first restoration attempt 69 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cdorp · 06-01-2022, 07:41 PM

I inherited my Dad's 69 C10 just a few months ago and hope to get as much done before he passes away and maybe we can get a ride together.
My family agreed to name the truck Carlton (the C10).

I have little renovation experience and never expected to have a project like this, so I'm on a budget and relying on the generosity of friends to help me learn. This forum has already been a huge help!

The short list of work so far:
A friend and I pulled the heads to replace gaskets and cracked exhaust manifold. Radiator was pretty beat up and may have explained the temp issues.
Along the way we learned it was a 400SBC out of a 75-76 (Impala?). It ran rough and was REAL loud when we got it! My wife wasn't happy. Now the glass packs crack real good! She's still not happy.

Found a used seat and bought proper belts to replace the 80's plush bucket seats mounted on 4x4's. Also made some door panels.
Tranny fluid was low from a leaky speedo bullet. Replaced, topped off fluid and properly installed the B&M shifter mount. Runs like a champ! Oh, and I uncovered that Carlton used to be a manual transmission.

PO installed disc brakes up front but crimped the rear brake line and left no parts on the passenger side. So the rear end came apart and now there are fresh brakes on all four wheels and improved power from a booster.

My summer project is to start addressing the rust and water coming into the cab. Hoping to find someone who can teach me/help cut and tack in some patch panels.

Now for some before/after pics...

underliner6 · 06-01-2022, 08:21 PM

Nice project. It looks like you are making good progress on making her a reliable driver.

**cwcarpenter98** · 06-01-2022, 10:21 PM

Welcome! Y'all have made some great progress so far

**The Rocknrod** · 06-02-2022, 07:08 PM

Welcome aboard.

LT7A · 06-03-2022, 12:56 PM

Welcome, and good work on the truck! Usually don't see an engine bay that clean for a truck in progress. You've done a nice job.

06-01-2022, 07:41 PM	#1
Cdorp Registered User Join Date: Feb 2022 Location: Portland, OR Posts: 5	New to this site and my first restoration attempt 69 C10 I inherited my Dad's 69 C10 just a few months ago and hope to get as much done before he passes away and maybe we can get a ride together. My family agreed to name the truck Carlton (the C10). I have little renovation experience and never expected to have a project like this, so I'm on a budget and relying on the generosity of friends to help me learn. This forum has already been a huge help! The short list of work so far: A friend and I pulled the heads to replace gaskets and cracked exhaust manifold. Radiator was pretty beat up and may have explained the temp issues. Along the way we learned it was a 400SBC out of a 75-76 (Impala?). It ran rough and was REAL loud when we got it! My wife wasn't happy. Now the glass packs crack real good! She's still not happy. Found a used seat and bought proper belts to replace the 80's plush bucket seats mounted on 4x4's. Also made some door panels. Tranny fluid was low from a leaky speedo bullet. Replaced, topped off fluid and properly installed the B&M shifter mount. Runs like a champ! Oh, and I uncovered that Carlton used to be a manual transmission. PO installed disc brakes up front but crimped the rear brake line and left no parts on the passenger side. So the rear end came apart and now there are fresh brakes on all four wheels and improved power from a booster. My summer project is to start addressing the rust and water coming into the cab. Hoping to find someone who can teach me/help cut and tack in some patch panels. Now for some before/after pics... Attached Images __________________ Thanks to my dad for passing on his 69 C10 project to me. It's created opportunities for me to learn a lot and meet new people.

06-01-2022, 08:21 PM	#2
underliner6 Registered User Join Date: Oct 2013 Location: Montrose, CO Posts: 328	Re: New to this site and my first restoration attempt 69 C10 Nice project. It looks like you are making good progress on making her a reliable driver. __________________ Jim 1972 K20 Cheyenne- 350/350/205 1972 K20 Cheyenne - 350/SM465/205 1971 K5 Blazer

06-01-2022, 10:21 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: New to this site and my first restoration attempt 69 C10 Welcome! Y'all have made some great progress so far __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

06-02-2022, 07:08 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New to this site and my first restoration attempt 69 C10 Welcome aboard. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-03-2022, 12:56 PM	#5
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,619	Re: New to this site and my first restoration attempt 69 C10 Welcome, and good work on the truck! Usually don't see an engine bay that clean for a truck in progress. You've done a nice job.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.