Rear floor parts or kit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

52napco · 06-21-2022, 07:10 AM

I searched and found members that make some of the bolts but was curious if anyone sells bolt kits or maybe a template for replacing the rear floor..thanks in advance

**HO455** · 06-21-2022, 03:38 PM

If he doesn't respond you might try sending a PM to Richard2717. He offered to send me a template when I replaced my floor.

You may have already seen my post where I listed the fasteners used on my 67. (Post 490 in link below) At the time I was unable to find exact matches for some of the fasteners so if your doing a accurate factory restoration you may have to reuse some of the fasteners or get creative. Luckily I was able to reuse all the bolts for the spare tire well on mine but the rest were too rusted to reuse.
The 40 or so carriage head bolts around the perimeter are likely to have the nuts too rusted to remove without the bolt spinning and rounding the square hole in the sheetmetal. Fortunately they are the easiest ones to get so destroying them during removal isn't a problem.

If you have any questions don't hesitate to ask.

http://67-72chevytrucks.com/vboard/s...698377&page=20

52napco · 06-21-2022, 06:19 PM

I going to start gathering parts and do the repair when it cools off

**richard2717** · 06-22-2022, 07:26 AM

I Just checked GMC Pauls site figuring if anyone had it, he would, but only one he has listed is for blazer & pickups. The perimeter bolts I think are the same other than the rear tail which HO455 can help with.

Is the wood totally gone in yours? I am pretty sure I still have a good floor section here I could get you measurements off of.

06-21-2022, 07:10 AM	#1
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Rear floor parts or kit I searched and found members that make some of the bolts but was curious if anyone sells bolt kits or maybe a template for replacing the rear floor..thanks in advance

06-21-2022, 03:38 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,350	Re: Rear floor parts or kit If he doesn't respond you might try sending a PM to Richard2717. He offered to send me a template when I replaced my floor. You may have already seen my post where I listed the fasteners used on my 67. (Post 490 in link below) At the time I was unable to find exact matches for some of the fasteners so if your doing a accurate factory restoration you may have to reuse some of the fasteners or get creative. Luckily I was able to reuse all the bolts for the spare tire well on mine but the rest were too rusted to reuse. The 40 or so carriage head bolts around the perimeter are likely to have the nuts too rusted to remove without the bolt spinning and rounding the square hole in the sheetmetal. Fortunately they are the easiest ones to get so destroying them during removal isn't a problem. If you have any questions don't hesitate to ask. http://67-72chevytrucks.com/vboard/s...698377&page=20 __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

06-21-2022, 06:19 PM	#3
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: Rear floor parts or kit I going to start gathering parts and do the repair when it cools off

06-22-2022, 07:26 AM	#4
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Rear floor parts or kit I Just checked GMC Pauls site figuring if anyone had it, he would, but only one he has listed is for blazer & pickups. The perimeter bolts I think are the same other than the rear tail which HO455 can help with. Is the wood totally gone in yours? I am pretty sure I still have a good floor section here I could get you measurements off of. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.