|
08-01-2004, 02:21 PM
|
#1 |
|
Registered User
Join Date: Mar 2004
Location: Aviano, Italy
Posts: 221
|
Cab floorboard paint
I am going to do some work on the 72 soon and the cab floor is in pretty good shape and only lightly rusted. I would like to piant and would like to know what you guys have used. I have some ERF (End Rust Forever) black paint from JC Whitney and it basically POR-15. Suggestions?
|
|
|
|
08-02-2004, 12:38 PM
|
#2 |
|
Registered User
Join Date: Jul 2002
Location: St. James, MO
Posts: 1,238
|
I used (the good 3M) Rubberized undercoating to paint the floor when I got mine back together. Of course, I still laid a mat over it, but the (thick) coat of rubber under it has helped deaden the sound. I didn't use any other underlayment.
__________________
'69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt. |
|
|
|
|
08-02-2004, 01:08 PM
|
#3 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
POR-15
|
|
|
|
|
08-02-2004, 01:34 PM
|
#4 |
|
Registered User
Join Date: Jul 2004
Location: quebec canada
Posts: 135
|
I will agree when you cut out the bad floor and replace it make sure you prep it with zinc cromate+primer then scratch pad the whole floor area to be done and seam seal any patches then undercoat (rubberized+paintable)type.
Then you can paint whatever coulor you like.I did this to my 67 chev because it helps deaden sound and it helps from any moisture getting at the metal like wet shoes ect.Its easy to use inexpensive and durable.Great for everyday drivers.Good luck hope it helps.
__________________
gm's are #1 1967 chevrolet short step 1988 chev 4x4 1/2 ton 1989 gmc 1/2 ton 1991 chev 1/2 ton 4x4 1993 Jeep grand cherokee 4x4 And yes a 94 Ford Mustang.  
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
