MI 1969 c60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Pvmt-Pndr** · 08-23-2021, 04:45 PM

1969 Chevrolet big fender C60, 427 gas, 5 speed trans, 2 speed rear end. 70% rewired and have the other 30%, haven't put on, all wiring cane from M+H electrical fabricators. Air brakes in great shape. I eplaced all the gaskets, stainless block hugger headers, 2-1/2" dual exhaust with an H-pipe, plugs, wires, HEI distributor, AVS2 carb, intellitronix gauge cluster (POS), had the clutch rebuilt by Detroit Clutch Masters, installed a new starter ring gear, new starter, 4 new retreads on the rear, 2 new steer tires, all 6 rims are new 22.5 (tubeless), recon led cab lights, fuel filter, interior has sound deadening and new rubber floor mat, 50 gallon saddle tank plus the factory 16-18 gallon in the cab. Comes with a set of 5:29 gears, not installed. Will cruise at 60 mph all day long with its current gears.

There's plenty more I can't remember right now, will add as I think of more.

I don't have enough time to enjoy the truck with my work schedule. $9,500 obo. Located in south east Michigan.

Feel free to ask any questions. I can take more pictures if needed .

**57NAPCO** · 08-24-2021, 02:30 AM

Cool truck, GLWS

**Rods** · 08-24-2021, 08:59 AM

Flip for you

**Pvmt-Pndr** · 08-24-2021, 10:28 AM

Thank you Rods! Much better.

**Pvmt-Pndr** · 09-14-2021, 04:15 PM

$8,500

**Pvmt-Pndr** · 03-12-2022, 09:57 PM

I forgot I posted it... $6500

**57NAPCO** · 03-13-2022, 08:56 AM

Any idea how many miles are on it?

**Pvmt-Pndr** · 03-13-2022, 09:37 AM

I took a picture of the original dash before I changed it to an intellitronix dash and it shows 80,484 miles.

**special-K** · 03-19-2022, 10:00 PM

Is the 427 original? Was the hood swapped?

**Pvmt-Pndr** · 03-20-2022, 09:19 AM

The build sticker inside the dash says it originally came with a 427. The current 427 is not the original one, the original motor had a lot of problems.

I pulled the original motor and installed another 427TD with great compression and still has the original cross hatches from the machining. I replaced all the gaskets in the new motor from the pan to the carb preventably. Not a single leak from the motor.

**Pvmt-Pndr** · 03-20-2022, 09:23 AM

I cannot tell you if the hood is original to the truck or not. I have not changed anything on the body since I've owned it. I know it does not have the 427 emblems.

**special-K** · 03-21-2022, 10:25 AM

Thanks for the answers. Another nice one I'll have to watch go on by.

**Pvmt-Pndr** · 08-14-2022, 08:34 AM

$6k

**Pvmt-Pndr** · 08-18-2022, 07:14 AM

Sold.....

08-23-2021, 04:45 PM	#1
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	1969 c60 1969 Chevrolet big fender C60, 427 gas, 5 speed trans, 2 speed rear end. 70% rewired and have the other 30%, haven't put on, all wiring cane from M+H electrical fabricators. Air brakes in great shape. I eplaced all the gaskets, stainless block hugger headers, 2-1/2" dual exhaust with an H-pipe, plugs, wires, HEI distributor, AVS2 carb, intellitronix gauge cluster (POS), had the clutch rebuilt by Detroit Clutch Masters, installed a new starter ring gear, new starter, 4 new retreads on the rear, 2 new steer tires, all 6 rims are new 22.5 (tubeless), recon led cab lights, fuel filter, interior has sound deadening and new rubber floor mat, 50 gallon saddle tank plus the factory 16-18 gallon in the cab. Comes with a set of 5:29 gears, not installed. Will cruise at 60 mph all day long with its current gears. There's plenty more I can't remember right now, will add as I think of more. I don't have enough time to enjoy the truck with my work schedule. $9,500 obo. Located in south east Michigan. Feel free to ask any questions. I can take more pictures if needed . Attached Images

08-24-2021, 02:30 AM	#2
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,234	Re: 1969 c60 Cool truck, GLWS

08-24-2021, 08:59 AM	#3
Rods Senior Member Join Date: Aug 2014 Location: Arizona Posts: 1,484	Re: 1969 c60 Flip for you Attached Images __________________ Az

08-24-2021, 10:28 AM	#4
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 Thank you Rods! Much better.

09-14-2021, 04:15 PM	#5
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 $8,500

03-12-2022, 09:57 PM	#6
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 I forgot I posted it... $6500

03-13-2022, 08:56 AM	#7
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,234	Re: 1969 c60 Any idea how many miles are on it?

03-13-2022, 09:37 AM	#8
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 I took a picture of the original dash before I changed it to an intellitronix dash and it shows 80,484 miles.

03-19-2022, 10:00 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1969 c60 Is the 427 original? Was the hood swapped? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-20-2022, 09:19 AM	#10
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 The build sticker inside the dash says it originally came with a 427. The current 427 is not the original one, the original motor had a lot of problems. I pulled the original motor and installed another 427TD with great compression and still has the original cross hatches from the machining. I replaced all the gaskets in the new motor from the pan to the carb preventably. Not a single leak from the motor.

03-20-2022, 09:23 AM	#11
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 I cannot tell you if the hood is original to the truck or not. I have not changed anything on the body since I've owned it. I know it does not have the 427 emblems.

03-21-2022, 10:25 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1969 c60 Thanks for the answers. Another nice one I'll have to watch go on by. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-14-2022, 08:34 AM	#13
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 $6k

08-18-2022, 07:14 AM	#14
Pvmt-Pndr Registered User Join Date: Jun 2017 Location: Temperance Michigan Posts: 375	Re: 1969 c60 Sold.....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.