1967 C50 pickup project - Cab getting done

[colgad]

Finishing up the grill on my 67 C50 pickup project. Chevrolet letting filled in today. Cab getting close to being done.
6.2 Detroit Diesel, NV4500.

[Pvmt-Pndr]

Man that truck is nice!!! Is under the hood as nice as the outside?

The more I see those bud rims the more I think I might need to make the swap from daytons! What are you running for gauges, the 2 small ones don't look stock at all.

I like your take on the hood vents/air intake I assume. Both sides of the hood or just the one?

[colgad]

Originally Posted by Pvmt-Pndr

Man that truck is nice!!! Is under the hood as nice as the outside?

The more I see those bud rims the more I think I might need to make the swap from daytons! What are you running for gauges, the 2 small ones don't look stock at all.

I like your take on the hood vents/air intake I assume. Both sides of the hood or just the one?

both sides, one side air intake the other just open to engine bay

Oil, Temp, Clock, Volt Autometer
Tach is a Diesel Tach driven off the Alternator
Firewall gutter is gone, smoothed over the old fan hole
69 Camaro hood vents
Thanks for the kind words

[Pvmt-Pndr]

Very sharp! Nice work under the hood also! It says a lot to me when someone cares about under the hood as much as they do the exterior.

What made you decide to stick with the 6.2 diesel? What's done to it or is it stock?

[c60clf]

Did you chrome headlight doors and grill hoops?, park turn nice touch as well, I'm a fan,Pat

[Airdirect]

Very nice work, really a sharp looking truck. I especially like the 6.2 diesel, I have often though of putting a 6.5 turbo in a two ton.

[colgad]

Originally Posted by c60clf

Did you chrome headlight doors and grill hoops?, park turn nice touch as well, I'm a fan,Pat

Not chrome, silver base coat / clear. I finished the grill painting and painted the bumper.

[colgad]

Originally Posted by Pvmt-Pndr

Very sharp! Nice work under the hood also! It says a lot to me when someone cares about under the hood as much as they do the exterior.

What made you decide to stick with the 6.2 diesel? What's done to it or is it stock?

A friend was pulling the 6.2 out of his 86 3+3 to do an LS swap and I had a 307 in the C50 and it seemed like a good idea to hear some Diesel noise. It really looks like it came in the truck stock. Not looking for big power it will just be a run around truck. Nothing done to it besides I pulled the heads had them cut and replaced the gaskets and head bolts while it was out of the truck just for good measure.

[colgad]

https://www.mecum.com/lots/AZ0322-50...et-c50-pickup/

Sold on Mecum for $66,000

[CarolinaHD]

Holy ****, nice work!