6 lug Budd hubs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1966 K10 · 08-14-2022, 03:06 AM

Will be needing new tires for the new 64 C60 in the near future. Currently running 20 in 6 lug Budd RH5 wheels with 10x20 tires, while new tires are not an issue getting a tech to change out the split wheels is impossible. Debating swapping hubs vs entire axles to 10 lug so some regular tubeless tires/wheels could be used and have more variety of sizes.

Has anyone tackled anything like this on these old beasts?

If not my cheapest option is 2.5 ton military split ring wheels. At least I can take care of mounting myself.

factorystock · 08-14-2022, 11:02 AM

Quote:

Originally Posted by 1966 K10

getting a tech to change out the split wheels is impossible.

I would deal with commercial truck tire dealers only, they should be able deal with your rims.

350TacoZilla · 08-15-2022, 01:39 AM

Keep thinking some school buses had those 6 lug hubs with tubeless tires but its going to be a treasure hunt.

This would be pricey but would get you modern stuff and from then on be easy to find replacement tires.

https://buytruckwheels.com/products/...pe#MainContent

Dawgy · 09-23-2022, 02:27 PM

Hey 1966 K10
I hope some of the information I have gathered over the years can help.
I have two 1963 two ton trucks. A Chevrolet C60 and a GMC 4400.
The C60 has the RH5 wheels (widow Makers) and the 4400 has the 6 Lug Budd wheels with the outer locking ring. The outer locking ring can be serviced by the commercial truck tire places. I change most of my own tires but I don't like working on the 20" wheels. When I air up my tires I custom made a tire gage with a 25' hose between the gage and the locking valve stem end. Able to air up from a distance. A couple of things to think about is when a RH5 wheel is still mounted on the truck the front and inside rear if they were to let go would blow towards the truck frame. The outside rear would blow towards the person filling the air. I always stay to the side a little bit to be in a safer location even with the long gage.
Options I have considered are:
The 22.5 six lug Budd wheels can be found on the older F600 trucks. They fit the hubs perfect but I have not verified the back spacing for the Duel rears.
The second is cutting out the 10 lug centers and welding to the 22.5 outers. This is what I plan for my C60 wheels.
Hopefully this helps some.

08-14-2022, 03:06 AM	#1
1966 K10 Registered User Join Date: Sep 2017 Location: Rainier, WA Posts: 152	6 lug Budd hubs Will be needing new tires for the new 64 C60 in the near future. Currently running 20 in 6 lug Budd RH5 wheels with 10x20 tires, while new tires are not an issue getting a tech to change out the split wheels is impossible. Debating swapping hubs vs entire axles to 10 lug so some regular tubeless tires/wheels could be used and have more variety of sizes. Has anyone tackled anything like this on these old beasts? If not my cheapest option is 2.5 ton military split ring wheels. At least I can take care of mounting myself. Attached Images

08-15-2022, 01:39 AM	#3
350TacoZilla Registered User Join Date: Sep 2010 Location: Hancock Md Posts: 420	Re: 6 lug Budd hubs Keep thinking some school buses had those 6 lug hubs with tubeless tires but its going to be a treasure hunt. This would be pricey but would get you modern stuff and from then on be easy to find replacement tires. https://buytruckwheels.com/products/...pe#MainContent

09-23-2022, 02:27 PM	#4
Dawgy Registered User Join Date: May 2018 Location: Decatur,Al Posts: 24	Re: 6 lug Budd hubs Hey 1966 K10 I hope some of the information I have gathered over the years can help. I have two 1963 two ton trucks. A Chevrolet C60 and a GMC 4400. The C60 has the RH5 wheels (widow Makers) and the 4400 has the 6 Lug Budd wheels with the outer locking ring. The outer locking ring can be serviced by the commercial truck tire places. I change most of my own tires but I don't like working on the 20" wheels. When I air up my tires I custom made a tire gage with a 25' hose between the gage and the locking valve stem end. Able to air up from a distance. A couple of things to think about is when a RH5 wheel is still mounted on the truck the front and inside rear if they were to let go would blow towards the truck frame. The outside rear would blow towards the person filling the air. I always stay to the side a little bit to be in a safer location even with the long gage. Options I have considered are: The 22.5 six lug Budd wheels can be found on the older F600 trucks. They fit the hubs perfect but I have not verified the back spacing for the Duel rears. The second is cutting out the 10 lug centers and welding to the 22.5 outers. This is what I plan for my C60 wheels. Hopefully this helps some.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.