wtb/ 3 speed trans for 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Johnny Outdoors · 07-14-2004, 11:00 PM

my three speed is going away
2nd and 3rd very noisy
anyone have a good one that they want to get rid of?
or that they swapped out?
thanks in advance

67ChevyC10Stepside · 07-14-2004, 11:17 PM

how much you payin?

Johnny Outdoors · 07-14-2004, 11:24 PM

how much you askin?

red71cheyenne · 07-14-2004, 11:45 PM

I have one with a tranfer case attached to it that you can have if you want to pay shipping. Jeff.

**CPNE** · 07-15-2004, 10:24 AM

A word of advise. Check which 3 speed you have. 67/68 used a shorter non-syncho'd version and 69-up used a longer synchro'd version. If you don't get one to match your existing tranny, you'lll have driveshaft and shift linkage issues to contend with.

The 67/68 one has 4 bolts on shift fork cover. The later (longer) version has 7.

JimKshortstep4x4 · 07-15-2004, 11:13 AM

Jeff,

Good observation, I did not know that.

Is there a way to tell from the outside, other than comparing the lengths?

Jim

**CPNE** · 07-15-2004, 11:17 AM

Quote:

Originally Posted by JimKshortstep4x4

Jeff,

Good observation, I did not know that.

Is there a way to tell from the outside, other than comparing the lengths?

Jim

Quote:

The 67/68 one has 4 bolts on shift fork cover. The later (longer) version has 7.

**1970 CST Short Wide** · 07-15-2004, 11:30 AM

I have a later one (longer) $50 plus shipping. Your a long way away and these are NOT light, Shipping could be costly. your call

Joe67 · 07-15-2004, 11:54 AM

I have a nice 3spd manual I pulled from a 68 truck back in 1995 or so. Still in the garage. $55 - will not ship (located near Detroit, MI)

JimKshortstep4x4 · 07-15-2004, 12:04 PM

Jeff,

Thanks, now I know the transmission that I have is the longer one!

Jim

**CPNE** · 07-15-2004, 12:05 PM

Quote:

Originally Posted by JimKshortstep4x4

Jeff,

Thanks, now I know the transmission that I have is the longer one!

Jim

No problem. I can't believe there was something I knew that you didn't. It's usually me asking you the questions.

*botboy* · 07-15-2004, 12:25 PM

If you would be willing to settle for a 4 speed, 2WD SM420, I have one out of the '67 1-ton duallie I am parting out. $75 + shipping, I'm in Delano MN 55328.

67ChevyC10Stepside · 07-15-2004, 01:02 PM

i have a 67 3 spd that i would sell as well it's the short one i think

stelth2002 · 07-15-2004, 01:48 PM

botboy, your not keeping your manual?

*botboy* · 07-15-2004, 02:34 PM

Quote:

Originally Posted by stelth2002

botboy, your not keeping your manual?

If things go as planned, next week I'll be picking up a '71 Blazer, orange and white, NP205 and SM465 and dropping the 350 and some other goodies out of my '72 and parting out the rest. Otherwise I have a guy who is selling me a '69 Longhorn and a '70 GMC, both manual trannies if I decide to continue to drive a truck. I've decided that my '72 is so badly thrashed body wise that when I get the blazer or longhorn (or both :p ) I'll be pulling the engine and a few of the nicer parts (interior, dash) then pulling and scrapping the cab, selling off the vin plate and selling the frame and drive gear.

Tx Firefighter · 07-15-2004, 02:53 PM

My local trans shop rebuilds them for 200 dollars exchange. You might check that avenue, because shipping on one of those cast iron rascals is going to cost you.

Johnny Outdoors · 07-15-2004, 10:16 PM

thanks for all the replies
ill look into maybe having mine rebuilt

HuggerCST · 07-16-2004, 10:02 AM

I hope it doesn't cost as much to rebuild yours as the last one I had rebuilt.(for work) It was in the $700 range. BTW, Kurt L has one 4 sale.

stelth2002 · 08-04-2004, 07:01 PM

i THINK i might have what you are looking for johnny, I can get a pic this weekend if your interested.

TP from Cntl PA · 08-04-2004, 08:02 PM

I got one(Late syncro 3spd out of a '69) that I'd trade even up for a wide ratio truck 4spd

07-14-2004, 11:00 PM	#1
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	wtb/ 3 speed trans for 67 my three speed is going away 2nd and 3rd very noisy anyone have a good one that they want to get rid of? or that they swapped out? thanks in advance __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

07-14-2004, 11:17 PM	#2
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	how much you payin? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

07-14-2004, 11:24 PM	#3
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	how much you askin? __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

07-14-2004, 11:45 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	I have one with a tranfer case attached to it that you can have if you want to pay shipping. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

07-15-2004, 10:24 AM	#5
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	A word of advise. Check which 3 speed you have. 67/68 used a shorter non-syncho'd version and 69-up used a longer synchro'd version. If you don't get one to match your existing tranny, you'lll have driveshaft and shift linkage issues to contend with. The 67/68 one has 4 bolts on shift fork cover. The later (longer) version has 7. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-15-2004, 11:13 AM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Jeff, Good observation, I did not know that. Is there a way to tell from the outside, other than comparing the lengths? Jim

07-15-2004, 11:30 AM	#8
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,193	I have a later one (longer) $50 plus shipping. Your a long way away and these are NOT light, Shipping could be costly. your call __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

07-15-2004, 11:54 AM	#9
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	I have a nice 3spd manual I pulled from a 68 truck back in 1995 or so. Still in the garage. $55 - will not ship (located near Detroit, MI) __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

07-15-2004, 12:04 PM	#10
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Jeff, Thanks, now I know the transmission that I have is the longer one! Jim

07-15-2004, 12:25 PM	#12
botboy Account Suspended Join Date: Dec 2003 Location: Delano, MN Posts: 630	If you would be willing to settle for a 4 speed, 2WD SM420, I have one out of the '67 1-ton duallie I am parting out. $75 + shipping, I'm in Delano MN 55328.

07-15-2004, 01:02 PM	#13
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	i have a 67 3 spd that i would sell as well it's the short one i think __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

07-15-2004, 01:48 PM	#14
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	botboy, your not keeping your manual? __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

07-15-2004, 02:53 PM	#16
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	My local trans shop rebuilds them for 200 dollars exchange. You might check that avenue, because shipping on one of those cast iron rascals is going to cost you. __________________ I'm on the Instagram- @Gearhead_Kevin

07-15-2004, 10:16 PM	#17
Johnny Outdoors SOON TO BE A STEP SIDE Join Date: Apr 2004 Location: Little Valley, N.Y. Posts: 169	thanks for all the replies ill look into maybe having mine rebuilt __________________ 67 CHEVY LONGBED----- BEST 51 DOLLARS EVER SPENT ON EBAY! 4.3 LITER INJECTED MOTOR WITH 5 SPEED GOING IN SOON

07-16-2004, 10:02 AM	#18
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I hope it doesn't cost as much to rebuild yours as the last one I had rebuilt.(for work) It was in the $700 range. BTW, Kurt L has one 4 sale. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

08-04-2004, 07:01 PM	#19
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	i THINK i might have what you are looking for johnny, I can get a pic this weekend if your interested. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

08-04-2004, 08:02 PM	#20
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	I got one(Late syncro 3spd out of a '69) that I'd trade even up for a wide ratio truck 4spd __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

Register or Log In To remove these advertisements.