|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-13-2022, 06:13 AM
|
#1 |
|
Registered User
Join Date: Apr 2009
Location: independence, mo
Posts: 14
|
3 speed shifting issues
I have a 69 with 3 on the tree. It will shift into 3rd and 4th gear with no problem but won’t shift into reverse or 1st gear. Reverse and 1st gear work when moving the linkage by hand though. I’ve lubricated the linkage and changed the bushings so far. My next step is to try adjusting the linkage. Is there anything else I should be looking at?
|
|
|
|
10-13-2022, 07:02 AM
|
#2 |
|
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,280
|
Re: 3 speed shifting issues
Adjust the linkage you will be amazed at the difference. There is a outline on here for that do a search.
|
|
|
|
|
10-13-2022, 08:27 AM
|
#3 |
|
Senior Member
 
Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
|
Re: 3 speed shifting issues
Check and change the bushings/ sleeves before attempting to re adjust , the old bushings are probably just sloppy .
 This thread may help . http://67-72chevytrucks.com/vboard/s...d.php?t=819348
__________________
 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
