Need help with engine ID #'s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Robert1970C20rstbukt · 08-05-2004, 04:18 PM

Got these off the front passenger's side ledge on the block:

V0413CNV

10C167383

Can somebody translate these? I tried looking on Mortec, etc but I'm stuck. I was told that this is a 350 block, if that helps anything.

Thanks

dubie · 08-05-2004, 04:34 PM

Look on the rear of block beside the distributor on the drivers side and there should be a number there. It will be a lot easier to de code with that number. It shouldn't cintain any letters if it's a SBC

jose · 08-05-2004, 04:43 PM

Heres what i came up with useing the last letters CNV . Jose

1970 CNV 350 tur hydro trans. 250 horse 2 bolt main Caprice

Bobalouie · 08-05-2004, 04:45 PM

V0413= Manufactured in Flint, Michigan on April 13th

CNV= 1970 350cid w/tur hydro trans. 250HP 2BBL Carb used in the Caprice

Robert1970C20rstbukt · 08-05-2004, 04:56 PM

OK, thanks for the help everybody.

08-05-2004, 04:18 PM	#1
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Need help with engine ID #'s Got these off the front passenger's side ledge on the block: V0413CNV 10C167383 Can somebody translate these? I tried looking on Mortec, etc but I'm stuck. I was told that this is a 350 block, if that helps anything. Thanks __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

08-05-2004, 04:34 PM	#2
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Look on the rear of block beside the distributor on the drivers side and there should be a number there. It will be a lot easier to de code with that number. It shouldn't cintain any letters if it's a SBC __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

08-05-2004, 04:43 PM	#3
jose Registered User Join Date: Feb 2001 Location: Salem , Oregon 97301 Posts: 1,796	Heres what i came up with useing the last letters CNV . Jose 1970 CNV 350 tur hydro trans. 250 horse 2 bolt main Caprice __________________ 68 GMC 4x4 SWB jose6772@yahoo.com

08-05-2004, 04:45 PM	#4
Bobalouie Fetzer Valve Technician Join Date: Jun 2003 Location: Stillwater, OK Posts: 205	V0413= Manufactured in Flint, Michigan on April 13th CNV= 1970 350cid w/tur hydro trans. 250HP 2BBL Carb used in the Caprice __________________ 1972 Chevy K10 SWB

08-05-2004, 04:56 PM	#5
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	OK, thanks for the help everybody. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.