6-Lug Rear Disc Conversion kit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

custom10nut · 11-12-2022, 08:52 PM

Is the a Company/Vendor that makes a 6-Lug Rear Disc conversion kit?
I’ve looked high and low, but have only been able to find a few 5-Lug kits.
As an alternative, would a set of brakes from a newer truck work?
I know I’d have to cut and weld the brackets from the new axle to the old, but having never done, or even seen this done.
Has anyone out there ever done this?

**Getter-Done** · 11-12-2022, 08:56 PM

Will this kit work for you?

link: https://www.speedwaymotors.com/1963-...it,434914.html

**cwcarpenter98** · 11-12-2022, 09:10 PM

I believe this thread should help: https://67-72chevytrucks.com/vboard/...d.php?t=637489 Captainfab has a variety of bracketry solutions

custom10nut · 11-13-2022, 09:16 AM

Thank you for all three responses.
It looks to be more simple than I thought, with no welding involved.

I’m thinking about getting another complete rear ended, and doing the conversion on the bench, then do the swap out.

**Jason Banks** · 11-13-2022, 12:55 PM

Here's another
https://azproperformance.com/collect...-kit-63-87-c10

11-12-2022, 08:52 PM	#1
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,891	6-Lug Rear Disc Conversion kit? Is the a Company/Vendor that makes a 6-Lug Rear Disc conversion kit? I’ve looked high and low, but have only been able to find a few 5-Lug kits. As an alternative, would a set of brakes from a newer truck work? I know I’d have to cut and weld the brackets from the new axle to the old, but having never done, or even seen this done. Has anyone out there ever done this?

11-12-2022, 08:56 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,441	Re: 6-Lug Rear Disc Conversion kit? Will this kit work for you? link: https://www.speedwaymotors.com/1963-...it,434914.html __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

11-12-2022, 09:10 PM	#3
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,492	Re: 6-Lug Rear Disc Conversion kit? I believe this thread should help: https://67-72chevytrucks.com/vboard/...d.php?t=637489 Captainfab has a variety of bracketry solutions __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

11-13-2022, 09:16 AM	#4
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,891	Re: 6-Lug Rear Disc Conversion kit? Thank you for all three responses. It looks to be more simple than I thought, with no welding involved. I’m thinking about getting another complete rear ended, and doing the conversion on the bench, then do the swap out.

11-13-2022, 12:55 PM	#5
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,624	Re: 6-Lug Rear Disc Conversion kit? Here's another https://azproperformance.com/collect...-kit-63-87-c10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.