Rear Parking Brake Cable Bracket -- Left/Driver?

[72malibu]

Does anyone know where I can one? I don't see them repro'd. This is for a 1975 2wd c15 (Gentleman Jim).

I bought two NOS brackets, with different GM part no. stickers on them (6272301 and 6272302) but they are identical! Both are for the right/passenger side.

Here are photos of what I have -- I need the driver side :-)

The way the brackets mount, they go under the frame, with the 2 rivet holes to the outside, and with the cable hole to the inside and forward of the rivets.

If I try to use these on the driver side, the rear PB cable would be too far back or outside the frame.

[72malibu]

Hmm, not sure, but it looks like I may need PN 6272303 or revised PN 341273.

I'm not finding anything with those numbers, hoping somebody has an old frame or an idea where I can find a bracket.

[chrismoore701]

old school junk yard, they are still out there

[Dead Parrot]

I looked at the ones on my C10. They are mirrors of each other. Looks like one could be made out of some angle iron. Do a little cutting, drill 3 holes, install. Didn't look real close but they might be riveted. A yard find might have to be ground off.

[72malibu]

Yes to both -- mirror image and riveted.

They're stamped with a gusset in them, so they'd be stronger than a 90-degree bend.

[Factory Guy]

I would go find a junkyard that specializes in Squares, even if you have to drive some (I have to drive 2 hours{each way} to get to mine).

[72malibu]

Originally Posted by Factory Guy

I would go find a junkyard that specializes in Squares, even if you have to drive some (I have to drive 2 hours{each way} to get to mine).

Thanks, will have to see if there's one in the Maryland/Virginia vicinity -- haven't heard of one but they probably exist.