GMT400 Development Video - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Bob B.** · 12-29-2022, 01:20 AM

There is some truth to that, but living with all 3 major pickup makes of that era I can say the slightly smaller GM trucks did anything the other two did and drove a lot better than either. My only gripes with the 400 series trucks were the welded on door hinges (ever change those?) and the 4X4 IFS on the 2500's and 3500's could have been stronger (that issue wasn't resoved until the 2011 HD's). The 400's are becoming classics just like the 67-72's are and plenty seem to have survived. Can't say that about contemporary Fords and Rams.

12-29-2022, 01:20 AM	#3
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,457	Re: GMT400 Development Video There is some truth to that, but living with all 3 major pickup makes of that era I can say the slightly smaller GM trucks did anything the other two did and drove a lot better than either. My only gripes with the 400 series trucks were the welded on door hinges (ever change those?) and the 4X4 IFS on the 2500's and 3500's could have been stronger (that issue wasn't resoved until the 2011 HD's). The 400's are becoming classics just like the 67-72's are and plenty seem to have survived. Can't say that about contemporary Fords and Rams. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90. Last edited by Bob B.; 12-29-2022 at 05:26 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.