|
04-04-2002, 11:07 PM
|
#1 |
|
now thats a true COON DOG
 Join Date: Nov 2000
Location: Franconia, NH
Posts: 1,977
|
Got my rims today
I just wanted to say thanks bbs1965, I got my rims today! Woo Hoo there 6 lug aluminum slots, 15" by 10". Will my 235 75 r15's fit on these rims?
------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi
__________________
current project 67  402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!)71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled)  was my first truck!... oh well...72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!) |
|
|
|
04-05-2002, 05:51 AM
|
#2 |
|
Senior Member
 
Join Date: Dec 1999
Location: TN/VA
Posts: 6,388
|
I put the same tire on a set of 15x8's and just by looking at them I don't beleive they would go on a set of 15x10's.
------------------ 67 GMC Stepside(UNDER CONSTRUCTION) 67 GMC Custom 67 Chevy C-30 |
|
|
|
|
04-05-2002, 10:59 AM
|
#3 |
|
now thats a true COON DOG
Join Date: Nov 2000
Location: Franconia, NH
Posts: 1,977
|
Ok, thanks Tim!
------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi
__________________
current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!)71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well...72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!) |
|
|
|
|
04-05-2002, 11:56 AM
|
#4 |
|
Resident Curmudgeon
Join Date: Dec 1999
Location: NH
Posts: 6,664
|
what about 30 x 9.5
------------------ Jeff Jesseman Cheyenne Parts Northeast Franconia, NH 67 Chevy SWB Fleetside 70 GMC Burb 1/2 ton 2wd 72 Chevy Burb 3/4 ton 4x4 Parts bought and sold
__________________
Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter  Maybe I need to sell some of this crap  Yet another Bozo with a sawz-all |
|
|
|
|
04-05-2002, 12:54 PM
|
#5 |
|
Got 20's????
Join Date: Oct 2001
Location: Aberdeen SD
Posts: 1,451
|
30's will work, but 31's would be even better. The tread width should be the same width of the rim.
------------------ 72 Chevy C/10 87 Chevy Silverado 4X4 www.geocities.com/chevylwb/chevylwb.html Aberdeen South Dakota
__________________
99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road. |
|
|
|
|
04-05-2002, 02:02 PM
|
#6 |
|
now thats a true COON DOG
Join Date: Nov 2000
Location: Franconia, NH
Posts: 1,977
|
so 30x 9.5's will work? they will expand to fit that 10" rim?
------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi
__________________
current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!)71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well...72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!) |
|
|
|
|
04-05-2002, 03:55 PM
|
#7 |
|
Senior Member
Join Date: Dec 2000
Location: Indiana
Posts: 3,074
|
Geez, 10" rim,,, 9.5" tire. Not a good idea.
255/70/15 or a tire 12 wide. where's the pics? ------------------
__________________
71 Chevy CST Long Fleet 350/350/3.07 leaf rear. |
|
|
|
|
04-05-2002, 03:59 PM
|
#8 |
|
Strongman Garage
Join Date: Apr 2000
Location: Salinas, CA
Posts: 10,241
|
could do 30 or 31x10.5s .....
------------------ My Truck pictures www.xframeimpala.com 68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET" 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 IM me on aol SN= SHAGROLET
__________________
Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE |
|
|
|
|
04-05-2002, 06:09 PM
|
#9 |
|
now thats a true COON DOG
Join Date: Nov 2000
Location: Franconia, NH
Posts: 1,977
|
darn, that means I have to buy atleast 2 tires...... I actully opened up the other 3 boxes (LOL) and found out I have bigs and littles. two of the rims are 10" wide and the other two rims are 8" wide so I guess all I need to do right now is find atleast two tires to fit the rear.
Les- 255/70/15's arn't those kinda short? I need a tire thats going to be atleast as tall as my 30" tires I have on it now because I have 4.11 gears! I'll have some pic's up maybe tomarrow. ------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi
__________________
current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!)71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well...72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!) |
|
|
|
|
04-05-2002, 06:17 PM
|
#10 |
|
Senior Member
Join Date: Dec 2000
Location: Indiana
Posts: 3,074
|
255/70/15 are 29.2" tall.
your 30/9.50/15 are roughly 29.5" tall. these measurements vary from brand to brand on the actual height, but are very close. I have 31" on a 3.07 rear.  ------------------
[This message has been edited by 71Chev (edited April 05, 2002).]
__________________
71 Chevy CST Long Fleet 350/350/3.07 leaf rear. |
|
|
|
|
04-05-2002, 06:18 PM
|
#11 |
|
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
275x60-15 tires would fit the 15x10's pretty good, and with some 255x60's up front, it would look pretty mean! Be prepared to spend though, the 255 tires will proably cost $80 or so, and the 275's 90+. But who cares, it will look cool
.------------------ Lucas "Another proud owner of one of the coolest trucks ever built" drop_shift@hotmail.com My Daily-Driver: '72 Chevy LWB Custom/10. Rebuilt 350, 300 HP thanks to a few go-fast goodies. Ochre with a white top. Future plans include TBI fuel injection, a 700R4 tranny, and possibly some 3.73 rear gears.
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
|
|
|
|
04-05-2002, 06:27 PM
|
#12 |
|
Senior Member
Join Date: Dec 2000
Location: Indiana
Posts: 3,074
|
Brian you can order the 255/70/15 in the Dunlop GT Qualifier TR for $71 shipped or the BFG Radial T/A for $73 shipped. from discount tire.
------------------
__________________
71 Chevy CST Long Fleet 350/350/3.07 leaf rear. |
|
|
|
|
04-05-2002, 06:40 PM
|
#13 |
|
now thats a true COON DOG
Join Date: Nov 2000
Location: Franconia, NH
Posts: 1,977
|
ok first I would likr to say thanks for the tire info!
Yellow how many inches tall and wide are those 275/60/15 and how tall and wide are those 255/60/15? Les cool good to know thanks! ------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi
__________________
current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!)71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well...72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!) |
|
|
|
|
04-05-2002, 08:53 PM
|
#14 |
|
Senior Member
Join Date: Dec 2000
Location: Indiana
Posts: 3,074
|
275/60/15 - section(tread) width 11", 28" tall.
255/60/15 - section width 10.2", 27.1" Tall ------------------
__________________
71 Chevy CST Long Fleet 350/350/3.07 leaf rear. |
|
|
|
|
04-05-2002, 09:02 PM
|
#15 |
|
Senior Member
Join Date: Dec 1999
Location: Darrington, Washington
Posts: 3,963
|
I have a set of 15x8 rallys mounted to some 235 75 15's and it stretches them,i wouldnt put them on 10's,probably not safe.probably pop a tire bead going around a corner too fast?
|
|
|
|
|
04-05-2002, 09:17 PM
|
#16 | |
|
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
ive got the same as DR and i think there too short, there just like 26.5 inches tall. not sure on the width. if any one feels like converting though its 23.5 centimeters wide
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
|
|
|
|
04-06-2002, 10:12 AM
|
#17 |
|
now thats a true COON DOG
Join Date: Nov 2000
Location: Franconia, NH
Posts: 1,977
|
allright, but I need a tire that's ATLEAST 30" tall in the rear anyways and would like it to be 12" wide or so..........any company make them?
------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi
__________________
current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!)71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well...72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!) |
|
|
|
|
04-06-2002, 11:37 AM
|
#18 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,998
|
BFG also made/makes? a 285/70/15 in the radial t/a. Specs would be: approx 11" width; 30.7" height; 7.85 sidewall height. This would fit your req's pretty close. To keep symmetry w/front & rear proportions use a 225/70/15 on the front(a 235/70 would also work)& those specs would be: approx 8.85" width; 27.4" height; 6.2" sidewall height. The 11" rear div. by 10" wheel= 1.1" of tire/per inch of wheel as does the 8.85" front div. by 8" = 1.10" tire/per inch of wheel.
[This message has been edited by SCOTI (edited April 06, 2002).]
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
 |
| Bookmarks |
|
|
Linear Mode
