|
01-05-2023, 03:48 PM
|
#1 |
|
Junior Member
 Join Date: Feb 2022
Location: Ohio
Posts: 78
|
Drip rails
Does anyone know of a vendor that sells door drip rails with the correct height of the outer flange? All I've found are 1/8" short. I did a search on the forum and found an older thread that said all were made by one manufacturer and all were wrong.
|
|
|
|
01-06-2023, 06:55 AM
|
#2 |
|
Senior Member
 Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,721
|
Re: Drip rails
Nothings changed, still just 1 manufacturer and made incorrectly.
Paul Jr @ GMCPauls |
|
|
|
|
01-06-2023, 09:45 AM
|
#3 |
|
Junior Member
Join Date: Feb 2022
Location: Ohio
Posts: 78
|
Re: Drip rails
Thanks for the reply, at least now I can stop looking and figure out a plan.
|
|
|
|
|
01-06-2023, 06:03 PM
|
#4 |
|
Registered User
Join Date: Jun 2015
Location: Carlos MN
Posts: 2,138
|
Re: Drip rails
On my 68 it had a couple bad spots in the vertical part of the drip rails. I cut out the bad vertical spots. Then I got some 1/8"? flat stock from the hardware. Cut it to length and welded it into place. I had to grind the top of the flat stock to match the stock drip rail height. Once done you could not tell.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
