MD Suburban metal cuts - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

m7vasque · 11-30-2022, 02:18 PM

Quote:

Originally Posted by richard2717

Here is some pics of the ones I have available at the moment. they have pcs of a hitch that would need cleaned off and the rear body mount holes could use a little work. $75 shipped for the pair .

.

Thank you. Will take a look after work and send a PM.

C130Nav · 11-30-2022, 05:23 PM

Quote:

Originally Posted by richard2717

Mike
It has been real wet here but I did find a box of brackets already pulled here in the shop. Is the pair of brackets shown here what you need? or is it the smaller single bracket you are looking for (would need to check outside for the matching side) The pair shown would be $75 shipped and they are very nice. I would need to see If I have a good 2nd bracket for the smaller if that is what you needed.

.

Richard,

yes, the 2 brackets on the right are the ones I need for position #3. The one on the far left might work; it looks different than whats on mine right now. Will have to look in the morning and check. Do you have another #3 bracket in better shape than the one on the right? The center one looks awesome; do you have another in that shape?

thanks

**richard2717** · 12-01-2022, 03:47 PM

Mike
These are the best ones I have. The one on the outside is mostly surface rust but there are a few pits where the top turns to the side. I don't think it would be any problem at all structurally. There is no pitting in the body mount hole but it appears like the mount was worn out and the bolt was rubbing the edge of it. Both of them came from the same frame. Here are a few closer pictures as well.
Richard
.

C130Nav · 12-02-2022, 10:10 PM

OK, those look good; I'll take them. Also the bracket for position #4 should work if you have both sides.

How about $100 shipped for all 4 pieces?

**richard2717** · 12-05-2022, 01:02 PM

Quote:

Originally Posted by C130Nav

OK, those look good; I'll take them. Also the bracket for position #4 should work if you have both sides.

How about $100 shipped for all 4 pieces?

All the other 4th positions I have are no good. I am assuming I must have already sold the one from this set. I can do $100 for the 3 shown

C130Nav · 12-05-2022, 08:22 PM

OK, that works. PM me with your payment info

**richard2717** · 12-07-2022, 03:36 PM

Quote:

Originally Posted by C130Nav

OK, that works. PM me with your payment info

Parts shipped out today so you should have them Friday or Saturday with any luck. Post office says 2 days but who knows with them anymore.

C130Nav · 12-17-2022, 03:11 PM

PM sent

**richard2717** · 12-19-2022, 12:56 PM

Pics for C130Nav

Mike I found the 4th one. I sent you a pm

.

**richard2717** · 12-20-2022, 09:30 PM

...

ajgriffin · 01-08-2023, 05:33 AM

I know it isn't a metal cut, but any chance you have the washers that go on the upper control arm studs? I sent my front end out for powder with 4, but only 2 came home.

**richard2717** · 01-08-2023, 01:51 PM

I can take a look when I get back home later today

ajgriffin · 01-09-2023, 11:50 PM

Quote:

Originally Posted by richard2717

I can take a look when I get back home later today

Thanks!

**richard2717** · 01-10-2023, 11:27 AM

I have not been able to locate any as of yet. Have you seen this thread?

https://67-72chevytrucks.com/vboard/...d.php?t=589541

ajgriffin · 01-13-2023, 03:28 AM

Quote:

Originally Posted by richard2717

I have not been able to locate any as of yet. Have you seen this thread?

https://67-72chevytrucks.com/vboard/...d.php?t=589541

I have now, thank you! "Spherical washers" - learn something new every day!

12-01-2022, 03:47 PM	#78
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts Mike These are the best ones I have. The one on the outside is mostly surface rust but there are a few pits where the top turns to the side. I don't think it would be any problem at all structurally. There is no pitting in the body mount hole but it appears like the mount was worn out and the bolt was rubbing the edge of it. Both of them came from the same frame. Here are a few closer pictures as well. Richard . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-02-2022, 10:10 PM	#79
C130Nav Registered User Join Date: Feb 2018 Location: Little Rock Posts: 53	Re: Suburban metal cuts OK, those look good; I'll take them. Also the bracket for position #4 should work if you have both sides. How about $100 shipped for all 4 pieces?

12-05-2022, 08:22 PM	#81
C130Nav Registered User Join Date: Feb 2018 Location: Little Rock Posts: 53	Re: Suburban metal cuts OK, that works. PM me with your payment info

12-17-2022, 03:11 PM	#83
C130Nav Registered User Join Date: Feb 2018 Location: Little Rock Posts: 53	Re: Suburban metal cuts PM sent

12-19-2022, 12:56 PM	#84
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts Pics for C130Nav Mike I found the 4th one. I sent you a pm . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

12-20-2022, 09:30 PM	#85
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts ... Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-08-2023, 05:33 AM	#86
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 585	Re: Suburban metal cuts I know it isn't a metal cut, but any chance you have the washers that go on the upper control arm studs? I sent my front end out for powder with 4, but only 2 came home. Attached Images __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

01-08-2023, 01:51 PM	#87
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts I can take a look when I get back home later today __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-10-2023, 11:27 AM	#89
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: Suburban metal cuts I have not been able to locate any as of yet. Have you seen this thread? https://67-72chevytrucks.com/vboard/...d.php?t=589541 __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.