Dana 44 Ring Gear Swap Question

[Chaparralman1974]

Originally Posted by Accelo

Clay;
You will need to match the transmission angle is all.
If the transmission is pointing down 3 deg, the diff will point up 3 deg.
The vehicle should be on the ground and weighted like you will be running it.

Cool beans, thanks much!

I have another question though, what about the jounce bumpers on the front of the axle (HO52)? There are none on the 14 bolt. Should I cut them off of the Eaton and reweld them on the 14 bolt, or is there a source for new ones? They are rubber triangle looking things that mount to metal tabs on the front of the Eaton axle.


Clay