project 39

[CSHADES]

a little slow at work this week so i left a little early to try and get some of the 39 stuff done. welded in the rocker flange on the drivers side same as passenger side. i was a bit concerned on how the garnish mouldings were going to work out but after working on them a bit i dont think there is going to be a problem . the rear one was really easy after looking at it i decided i could just trim the bottom 2 inches and it would work. the front one i cut the 2 1/2 inches and it fit back together nicely. the biggest problem was figuring out what to use on the missing 7 inch gap front to back. i ended cutting a piece from another front moulding and using the factory splice cover to finish. i have a bit more to finish them up but i tried the glass channel and it fits nice. hopefully i can finish the bottoms of the doors and make my glass patterns this weekend.

[Kermitt47]

Great tutorial on what it takes to stretch one of these cabs for some more leg room. Please keep the postings coming.