Rockwell T-221 Transfercase Slop - Need Advice - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cbeerman · 03-03-2023, 08:36 AM

I checked out you build thread that's already one sweet ride.

How are the splines on your input shaft?

Since you have a 67 you can still get the splined adapter sleeve for it.
https://www.transmissionpartsdistrib...2-ton-3890590/

Because of the trans adapter the married style shims on the rear of bearing caps and from what I can tell the front output shaft is not shimmed.

BTW there is a difference in the married and divorced front output shafts.

03-03-2023, 08:36 AM	#8
cbeerman Registered User Join Date: Jan 2016 Location: NJ Posts: 455	Re: Rockwell T-221 Transfercase Slop - Need Advice I checked out you build thread that's already one sweet ride. How are the splines on your input shaft? Since you have a 67 you can still get the splined adapter sleeve for it. https://www.transmissionpartsdistrib...2-ton-3890590/ Because of the trans adapter the married style shims on the rear of bearing caps and from what I can tell the front output shaft is not shimmed. BTW there is a difference in the married and divorced front output shafts.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.