proportioning valve has 2 front outlets?

[Extended Power]

Originally Posted by 68 C10 Driver

So I am a few months away from getting the cab back on and connecting the brake lines.

My question is do most of you use a 'T' for the front brakes or use both ports for the front brakes?

I have never seen three brake lines coming from the distribution valve/block.
Only ever see two, the front, and rear lines.

I just rebent my lines from the dis-block. The hydroboost setup only has 3/16” line connections, and mine were 1/4”.
The front 1/4” line went down to the crossmember, where it splits off to two separate 3/16” lines. I just replaced the tee that was 3/16, 1/4, 3/16 with one that had all three ports in 3/16”. (Tubing size)