Screw for Turn Signal Lever - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'68OrangeSunshine** · 04-09-2023, 01:31 AM

I lost the little screw that holds the selector lever on the T/S Switch cam inside the steering column.
I'm tired of making Hand Signals.
What size is that screw?

**Getter-Done** · 04-09-2023, 10:32 AM

Well
I took the one out of a column I purchased here on the Board.

I found a tap and a nut that that tap goes in,
Just to double check it because over the years all kinds of stuff could happen.

If this screw is original (It appears to be),

It is a Pan head #8-32 and is 0.710" long and is self-starting.

Hope this helps.

04-09-2023, 01:31 AM	#1
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Screw for Turn Signal Lever I lost the little screw that holds the selector lever on the T/S Switch cam inside the steering column. I'm tired of making Hand Signals. What size is that screw? __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

04-09-2023, 10:32 AM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,408	Re: Screw for Turn Signal Lever Well I took the one out of a column I purchased here on the Board. I found a tap and a nut that that tap goes in, Just to double check it because over the years all kinds of stuff could happen. If this screw is original (It appears to be), It is a Pan head #8-32 and is 0.710" long and is self-starting. Hope this helps. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.