Ford Model A Tudor Modern Twist on a Classic

[28TudorAZ]

Originally Posted by Dieselwrencher

The rod looks awesome! Did you get your brakes figured out? I had a similar issue on my vette and it ended up being the MC push rod was adjusted a little too far out. When the brake fluid warmed up it applied the front calipers and they would lock on. It was the strangest thing.

I had the same thing on a 23 Bucket T where the front brakes would lock up. It ended up being the MC push rod binding just a little bit.

[gigamanx]

Originally Posted by 28TudorAZ

I had the same thing on a 23 Bucket T where the front brakes would lock up. It ended up being the MC push rod binding just a little bit.

Similar issue. Push rode between the booster and master cylinder was ok, but I had adjusted out the brake pedal rod thingo so it was too long. That caused the booster to sit about 50% closed when the pedal was released. Now I've gone too far the other way so somewhere in the middle will end up being my sweet spot.

[daveshilling]

Originally Posted by gigamanx

Wasn't happy with the seats, so why not cut my bucket seats in half and take out a section, weld them together, buy a sewing machine, learn to upholster, buy some foam, sew seat covers....
[/img][/url]

How did everyone pass up this update?! Doing your own upholstery is a pretty rare thing around here... this is awesome! Well done.

[28TudorAZ]

Any updates? I love this build.