The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-18-2023, 05:38 PM   #1
Father&son56project
Registered User
 
Join Date: May 2009
Location: Grey County Ontario
Posts: 208
A Vent for the Cowl Vent - Problem Solved!

A while back I posted a question about venting my cab (project Fargolet) to allow better operation of the cowl vent. The issue was that while the original cowl vent worked like a charm, it required cracking open a window to get the air to really flow well. The noise from the open window was horrendous, and it was right at ear level.

Here is the finished gizmo, which sits under the seat (seat bottom removed in the pic):







It's just a gate valve meant for RV use (dsraven’s idea) with the addition of a critter screen (leegreen’s idea). The gate valve is controlled by a push/pull knob at the base of the seat base. The results are fantastic! When I open the valve I get tons of air coming through the cowl vent to cool me off, with only a minute amount of noise as the air is now exiting the cab under the seat where it is nicely muffled.

Thanks for the ideas, guys!
Father&son56project is offline   Reply With Quote
Old 05-18-2023, 07:40 PM   #2
leegreen
Registered User
 
Join Date: Mar 2022
Location: Surrey BC
Posts: 913
Re: A Vent for the Cowl Vent - Problem Solved!

nice!
any heat/fumes come up from there if you are stopped in traffic?
leegreen is offline   Reply With Quote
Old 05-18-2023, 07:49 PM   #3
nvrdone
Registered User
 
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,482
Re: A Vent for the Cowl Vent - Problem Solved!

interesting idea. I do like the ability to close the vent. Did you consider using a vent in the rear of the cab behind the seat like late model trucks use?
__________________
49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's
Bought in 1973 for $235.00. Had it longer than my wife & Kids!!
nvrdone is offline   Reply With Quote
Old 05-19-2023, 08:24 AM   #4
Father&son56project
Registered User
 
Join Date: May 2009
Location: Grey County Ontario
Posts: 208
Re: A Vent for the Cowl Vent - Problem Solved!

Leegreen: I have not yet noticed any odours/fumes etc while stopped. My tailpipe exits the rear of the truck and the engine is a modern 4.3 V6 which spews no odours (unlike my ‘56 TF with the worn out 235 and draft tube system). As for traffic, the nearest town to me only has 3 traffic lights!

Nvrdone: I didn’t want to carve a hole into the cab, or deal with the interior panels that cover the rear of the cab so I opted for the gate valve. Plus there is the charm of the quirky things that my old truck has (like the crank-out windshield and lever activated cowl vent), so now I have another cool lever to work!
Father&son56project is offline   Reply With Quote
Old 05-19-2023, 09:47 AM   #5
Tempest67
Registered User
 
Tempest67's Avatar
 
Join Date: Sep 2018
Location: Ontario
Posts: 851
Re: A Vent for the Cowl Vent - Problem Solved!

very interesting idea, and well executed.

thanks for sharing
Tempest67 is offline   Reply With Quote
Old 05-19-2023, 11:43 AM   #6
nvrdone
Registered User
 
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,482
Re: A Vent for the Cowl Vent - Problem Solved!

I do like the idea. Im guessing you get plenty of air flow with the windows closed. I have a sliding rear window and with the vents open, rear window open and door windows closed the air flow is not bad.
__________________
49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's
Bought in 1973 for $235.00. Had it longer than my wife & Kids!!
nvrdone is offline   Reply With Quote
Old 05-19-2023, 10:50 PM   #7
dsraven
Registered User
 
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,322
Re: A Vent for the Cowl Vent - Problem Solved!

and now, the the next installment, you could install a plumbing T with one open side facing forward and a small restriction at the actual T. that would create a venturi as air flows through and improve the air flow as you drive.
haha. I waa bored so I had to one up LG. haha.
dsraven is online now   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:45 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com