DIY Wiring Tips to get better than average results.

[Lugnutz65]

I just finished writing a DIY for installing a wiring kit.
Click the link for the full DIY.
Installing a wiring kit can be very intimidating. These tips should help ease the stress.

LINK to DIY WIRING TIPS. https://lugnutz65chevystepside.weebl...ring-tips.html

Here’s a teaser pic.

[64shortbox]

Good write up & good information!

[Braunschweiger]

What a great DIY, my C10 is now done.
I did some things as you wrote.
I can improve on the next project.

[Getter-Done]

Great writeup

Lot of great tips and tricks.

Do you use a hot knife Braided plastic split loom?

If so which one do you use?

I was thinking of getting this one in the link below.
Link: https://www.harborfreight.com/130-wa...ife-60313.html

[Lugnutz65]

Originally Posted by Getter-Done

Great writeup

Lot of great tips and tricks.

Do you use a hot knife Braided plastic split loom?

If so which one do you use?

I was thinking of getting this one in the link below.
Link: https://www.harborfreight.com/130-wa...ife-60313.html

I cut my loom with a scissors and then use a propane torch to melt any frayed ends. Honestly, I don’t even do that always.

[Getter-Done]

Okay
I have used a heat gun most of the time.
I just was wondering if the knife would glue it together.

[slepysal]

thanks for the write up and motivation !