|
08-12-2004, 07:31 PM
|
#1 |
|
NOT REALLY BANNED!
 
Join Date: Jul 2004
Location: Shawnee, KS
Posts: 1,072
|
Just added some value
With the vacuum gauge and oil gauge going in
 Only thing now is I hope they both work and I didn't get duds. Not much of a loss tho, considering I got the whole vacuum cluster for free! Here are some pictures (YES! I know I need a new bezel)http://www.musclelogic.com/josh/gauges/IMAG0286.JPG http://www.musclelogic.com/josh/gauges/IMAG0287.JPG Anyone know how hard vacuum gauges really are to find? Any production numbers on this option?
__________________
1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art. Last edited by 1BadSS; 08-12-2004 at 07:35 PM. |
|
|
|
08-12-2004, 07:38 PM
|
#2 |
|
Registered User
Join Date: Jul 2003
Location: north of Phx AZ about 30 miles
Posts: 698
|
I would just paint the bezel before you put it back in, a little rattle can flat black would improve it a bunch. I think the smaller trucks didn't realy come with the vaccum guage but the large trucks did, so most that you find were swapped in from large truck clusters. I don't know if they available as an option or a dealer add on or anything for sure though.
__________________
Andy,Phx AZ '67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...) "23 C-Cab-sold '48 Ford 8N tractor(still working) '67 Scout(Now on the road) '70 MG B.-sold |
|
|
|
|
08-12-2004, 08:30 PM
|
#3 |
|
NOT REALLY BANNED!
Join Date: Jul 2004
Location: Shawnee, KS
Posts: 1,072
|
Thing is, I just painted it.... Guess i'll spray it again.
__________________
1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art. |
|
|
|
|
08-12-2004, 09:11 PM
|
#4 |
|
Registered User
Join Date: May 2004
Location: Canton North Carolina
Posts: 466
|
Air pressure and vacuum guages were big truck only options 10-30 series did not get them, the cluster was used across the boards for all series trucks.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
