MT Locking hubs

[MT65]

Locking hubs for 65 K-20, function well, changed differential reason for sale
$125..shipped

[1960chevypanel]

PM coming

[MT65]

Up top

[CCAR]

Would you sell just the bolts?

[MT65]

Originally Posted by CCAR

Would you sell just the bolts?

And what would those bolts be worth ??

[CCAR]

I'd say $15 or $20

[CCAR]

Originally Posted by MT65

And what would those bolts be worth ??

Can you help?

[MT65]

Originally Posted by CCAR

Can you help?

If I split it up, then I have original hubs without these original bolts, not sure the client would go for that, if this stuff is so special, why don’t you purchase them and have the bolts as well as spare hubs….make an offer…

[CCAR]

I'll DM you

[Joe P]

I would like to be next in line for these hubs. Sending PM

[Joe P]

Originally Posted by CCAR

Would you sell just the bolts?

The parts book lists these bolts as common hardware, (Page 6-24-P), Reference section 8.90. Size is 3/8 x 16 x 3. Grade is not listed but suggest using Grade 8 bolts. I've found Tractor Supply to be a good source for occasional hardware needs. Hope this helps.

[MT65]

Sold……

[CCAR]

Originally Posted by Joe P

The parts book lists these bolts as common hardware, (Page 6-24-P), Reference section 8.90. Size is 3/8 x 16 x 3. Grade is not listed but suggest using Grade 8 bolts. I've found Tractor Supply to be a good source for occasional hardware needs. Hope this helps.

Thanks for taking the time to post that, you must be part of the old guard : ) I was interested in the markings on the bolts, restoring a very original old truck.

[Joe P]

Originally Posted by CCAR

Thanks for taking the time to post that, you must be part of the old guard : ) I was interested in the markings on the bolts, restoring a very original old truck.

Here's one of the bolts from the hub on my truck, it's a 66 K20. Head marking are standard, I think the CP is the manufacturer. Numbers IDR, perhaps a date code. The radial lines indicate its a Grade 8 Bolt. I have some reference documents on bolt head markings and will dig them up if you wish. Send me a DM...

[CCAR]

Originally Posted by Joe P

Here's one of the bolts from the hub on my truck, it's a 66 K20. Head marking are standard, I think the CP is the manufacturer. Numbers IDR, perhaps a date code. The radial lines indicate its a Grade 8 Bolt. I have some reference documents on bolt head markings and will dig them up if you wish. Send me a DM...

PM coming