Core support to fender fastner question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Peanut74 · 05-27-2023, 08:48 PM

Fastner question here. As you know there is a triangular piece that holds the fender to the core support. On the top of thebtriangular piece there is a welded nut. Does a bolt go in it or is it for a hood bumper? I'm leaning towards a bolt but want to be sure.
Thanks

**Stocker** · 05-27-2023, 09:15 PM

Yep, it's for a bolt. The hood bumpers are farther forward.

You said the welded nut is on the top. On mine, it's on the bottom of the triangular piece. That said, the shop replaced my core support and may have assembled things wrong.

**mr.mud1** · 05-28-2023, 12:20 AM

the hood bumper goes on the grill just inside from the inside edge of the fender and the triangle plate should have the nut on the bottom,a 5/16's bolt goes through the flange on the back side of the rad support and into the triangle plate.i can make you a better picture in the morning if it's not clear.

**FirstOwner69** · 05-28-2023, 12:42 AM

Does this help?

Peanut74 · 05-28-2023, 07:46 AM

Thanks, I will I install a bolt in it just wanted to be sure
The nut is on the bottom. One step closer.

72c20customcamper · 05-28-2023, 08:25 AM

Also depends on year . The 67-68 trucks the hood bumper mounts on the grill itself

05-27-2023, 08:48 PM	#1
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Core support to fender fastner question Fastner question here. As you know there is a triangular piece that holds the fender to the core support. On the top of thebtriangular piece there is a welded nut. Does a bolt go in it or is it for a hood bumper? I'm leaning towards a bolt but want to be sure. Thanks __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

05-27-2023, 09:15 PM	#2
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,806	Re: Core support to fender fastner question Yep, it's for a bolt. The hood bumpers are farther forward. You said the welded nut is on the top. On mine, it's on the bottom of the triangular piece. That said, the shop replaced my core support and may have assembled things wrong. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

05-28-2023, 12:20 AM	#3
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,603	Re: Core support to fender fastner question the hood bumper goes on the grill just inside from the inside edge of the fender and the triangle plate should have the nut on the bottom,a 5/16's bolt goes through the flange on the back side of the rad support and into the triangle plate.i can make you a better picture in the morning if it's not clear. Attached Images

05-28-2023, 12:42 AM	#4
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,854	Re: Core support to fender fastner question Does this help? Attached Images __________________ Jim

05-28-2023, 07:46 AM	#5
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: Core support to fender fastner question Thanks, I will I install a bolt in it just wanted to be sure The nut is on the bottom. One step closer. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

05-28-2023, 08:25 AM	#6
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,912	Re: Core support to fender fastner question Also depends on year . The 67-68 trucks the hood bumper mounts on the grill itself __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.