Truck Bench Seats and Misc Rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kevinr1970 · 08-11-2004, 04:02 PM

I have two blue bench seats:
- 1982 (or 83) vinyl bench, a few tears but decent shape - $25
- 1986 clothe bench, no tears in the "seat", but a few on the side. It has a soft spot where the driver sits. Decent shape - $35

Set of four 15 x 7 (I think) black spokes with chrome centers. Only about 3-4000 miles on rims. Centers already not so hot looking but rims are like new.
$100 or make offer.

I'm in Seattle. Can get pictures if you want them.

mckpaul · 08-13-2004, 10:01 AM

I'd be interested in just the main foam cushion from the bottom half of the 82 bench (the one you didn't mention a soft spot where the driver sits) if it has seat belt holes, and if it's intact and not torn, but not the whole bench. Shipping would be outrageous for the whole thing. Even if you'd sell just the bottom foam shipping may be too high anyway due to size. Not sure I'd want to fold it, may tear or not hold it's shape. Also, not sure how UPS or USPS would expect it to be wrapped.

The bottom foam on mine is split on the drivers end and a couple of chunks missing, looking for one that isn't torn or split.

08-11-2004, 04:02 PM	#1
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Truck Bench Seats and Misc Rims I have two blue bench seats: - 1982 (or 83) vinyl bench, a few tears but decent shape - $25 - 1986 clothe bench, no tears in the "seat", but a few on the side. It has a soft spot where the driver sits. Decent shape - $35 Set of four 15 x 7 (I think) black spokes with chrome centers. Only about 3-4000 miles on rims. Centers already not so hot looking but rims are like new. $100 or make offer. I'm in Seattle. Can get pictures if you want them. __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

08-13-2004, 10:01 AM	#2
mckpaul Registered User Join Date: Dec 2002 Location: Houston Posts: 300	I'd be interested in just the main foam cushion from the bottom half of the 82 bench (the one you didn't mention a soft spot where the driver sits) if it has seat belt holes, and if it's intact and not torn, but not the whole bench. Shipping would be outrageous for the whole thing. Even if you'd sell just the bottom foam shipping may be too high anyway due to size. Not sure I'd want to fold it, may tear or not hold it's shape. Also, not sure how UPS or USPS would expect it to be wrapped. The bottom foam on mine is split on the drivers end and a couple of chunks missing, looking for one that isn't torn or split. __________________ Paul 1984 Chevy C-10 LWB/305



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.