67-72 cab corner 6x9 speaker brackets

[Johnl48]

Pm sent

[AllGoNoShow]

Went to install my brackets and realized the small floor brackets are different-one has elongated slotted holes which match up with the 2 holes in the bottom of the main speaker bracket- and the other has straight up/down elongated holes which are spaced 1/4-1/2 too short to have both holes line up with the 2 holes in the bottom of the main speaker bracket. What am I missing? (picture below)

[AllGoNoShow]

Bigblock73,

Your inbox is full, but on a similar note to the above, the floor brackets are bent at 90 degrees, which considering the cab slopes done significantly at the point, would make it impossible for the floor bracket to be in contact with both the floor and bracket.

I already started fabbing up new floor brackets, longer, holes in right spots, bent at about 120 degrees, but just wondering if you may be sending out floor brackets for different years with the 67-72 main speaker brackets.

[bigblock73]

Originally Posted by AllGoNoShow

Bigblock73,

Your inbox is full, but on a similar note to the above, the floor brackets are bent at 90 degrees, which considering the cab slopes done significantly at the point, would make it impossible for the floor bracket to be in contact with both the floor and bracket.

I already started fabbing up new floor brackets, longer, holes in right spots, bent at about 120 degrees, but just wondering if you may be sending out floor brackets for different years with the 67-72 main speaker brackets.

Sent you a message just now.

[rpajr52]

I would like a set with holes for 67-72.
Richard

[pgc]

I would like a set with holes also

[AllGoNoShow]

Those of you with those brackets and carpet- are you guys running the carpet underneath the speaker brackets or just cutting the carpet short and buttoning against the bottom? Can't really tell from all the pictures.

[TxGary]

Pm sent, I would like a set with holes. Thanks Gary

[Flashy2003]

I would like a set for 67-72 with holes. PM sent, Thanks

[Joyridin]

I will take a set with holes if you still have any. Thanks!

[Cheyenne1970]

I would like a set with holes if you have any available. Thank you

[Trash]

I would like a set for my 67 with no holes. Thanks..

[erick-1]

Is the set with no holes still available?

[MT65]

Would like a set with holes for a 67 please, the ones in my 65 fit perfectly, so we’re going to do it again.

[OneBad71]

Hi, could someone possibly show what mods they did to the passenger side lower bracket to install the speaker panel, pictures would be great .
Thank you in advance