How to get the steering wheel closer to dash? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nima · 08-26-2023, 10:28 PM

Hi:
Is there any way to do that with the stock column on my 67? Or has to be an aftermarket?
Thanks

**Rust_never_sleeps** · 08-26-2023, 11:03 PM

Recent thread had some stuff about getting columns cut down, among other options:

http://67-72chevytrucks.com/vboard/s...d.php?t=846904

**dmjlambert** · 08-26-2023, 11:18 PM

I had my stock non-tilt auto transmission column for 69 shortened. Perhaps the 67 column can be shortened as well. There are people on this forum who specialize in rebuilding columns and they may have experience and be able to do that for you. I recommend using a stock column. Mine is great. The person who did mine is randy500, who is no longer on the forum. He was banned because he would not give a refund on a part for somebody else, but my dealings with him were fine. If you have your column removed from your truck and can show pictures of it, some of the more experienced folks on the forum may be able to give guidance. I am not familiar with 67 parts and how they differ from the later years.

08-26-2023, 10:28 PM	#1
Nima Blue 67 Join Date: Apr 2004 Location: Western WA Posts: 1,179	How to get the steering wheel closer to dash? Hi: Is there any way to do that with the stock column on my 67? Or has to be an aftermarket? Thanks __________________ 1953 GMC 3/4 ton: current project 1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake 1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!! 1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive 1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project 2005 Silverado 2500, 4x4 Duramax, original owner

08-26-2023, 11:03 PM	#2
Rust_never_sleeps Senior Member Join Date: Jun 2022 Location: San Ramon,CA Posts: 591	Re: How to get the steering wheel closer to dash? Recent thread had some stuff about getting columns cut down, among other options: http://67-72chevytrucks.com/vboard/s...d.php?t=846904 Last edited by Rust_never_sleeps; 08-26-2023 at 11:05 PM. Reason: clarity

08-26-2023, 11:18 PM	#3
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,859	Re: How to get the steering wheel closer to dash? I had my stock non-tilt auto transmission column for 69 shortened. Perhaps the 67 column can be shortened as well. There are people on this forum who specialize in rebuilding columns and they may have experience and be able to do that for you. I recommend using a stock column. Mine is great. The person who did mine is randy500, who is no longer on the forum. He was banned because he would not give a refund on a part for somebody else, but my dealings with him were fine. If you have your column removed from your truck and can show pictures of it, some of the more experienced folks on the forum may be able to give guidance. I am not familiar with 67 parts and how they differ from the later years.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.