PA WTB Blazer trim screw cup washers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1970cstblazer** · 08-03-2023, 11:46 AM

I am looking for at least 10 of these guys used on the vinyl covered cardboard rear interior panels on CST trim level Blazers. I believe they are made out of stainless steel, since they seem to survive better than anything else surrounding them. I have a source for the correct self drilling/self tapping chrome trim screws, just need the screw cup washers.

**jimmy70** · 08-04-2023, 05:10 PM

This same category dated 7/26 Free blazer quarter panel interiors / maybe he'll pop them out and help you out. marko

**Getter-Done** · 08-04-2023, 08:42 PM

Quote:

Originally Posted by jimmy70

This same category dated 7/26 Free blazer quarter panel interiors / maybe he'll pop them out and help you out. marko

Great idea marko

Here's the Link: http://67-72chevytrucks.com/vboard/s...anel+interiors

**1970cstblazer** · 08-05-2023, 12:24 AM

Thanks for the link. I inquired with the poster. We shall see.

**jimmy70** · 08-05-2023, 08:27 AM

Wish you luck!

**a1vintage69** · 08-05-2023, 12:54 PM

These work also.
https://www.ebay.com/itm/254482845360

Tuff Gong · 08-05-2023, 01:02 PM

How would you even reuse these? Could you find a similar rivet?

**1970cstblazer** · 08-10-2023, 11:38 AM

Still looking for these. Someone has to have a crappy panel laying around. Still can't get even a response about the ones in TX.

**rwjtexas** · 08-19-2023, 10:42 AM

Good Morning, Have you thought about going to the salvage yard and using the screws that hold the carpet trim screws to the door bottoms of upper end trucks, Suburban's, and Blazers ? I believe they are the same type of screw from the factory. I may have some available, I have to look. Every time I go to the salvage yard, I try to get little things like this that are hard to find.

The Screws should be a #8 oval head and can be replaced. It appears the Conical Washer is the main thing you are needing.

**1970cstblazer** · 08-20-2023, 09:23 PM

Still looking..

**1rippen6** · 08-21-2023, 07:31 PM

I'll get a picture of what I have tomorrow

**rwjtexas** · 08-21-2023, 10:19 PM

Quote:

Originally Posted by 1970cstblazer

Still looking..

Okay ... I got some off a Door Panel today .. I went to Houston to get a drivers door off an 1985 K-5 along with some other items. The salvage yard would not let me pull anything, they did if for you ... never heard of this but, that's the way they do business.

You mentioned 10, I should be able to get that many to you. I will try to post a picture tomorrow.

**1rippen6** · 08-22-2023, 10:14 PM

I have more, this is what was in the first bag.

**1970cstblazer** · 08-23-2023, 08:22 AM

Those are perfect. LMK how much and how to pay. Thanks!

**1rippen6** · 08-23-2023, 10:14 AM

Quote:

Originally Posted by 1970cstblazer

Those are perfect. LMK how much and how to pay. Thanks!

How many do you need

**TKCR** · 08-23-2023, 10:28 AM

If rippen doesn’t have the amount you need, I probably have enough to make up the difference

**1970cstblazer** · 08-24-2023, 07:17 AM

I will need at least 10, but I will probably err on the side of caution and obtain 15.

**1rippen6** · 08-24-2023, 07:30 AM

Quote:

Originally Posted by 1970cstblazer

I will need at least 10, but I will probably err on the side of caution and obtain 15.

Ok, I should have enough to cover that, I'll confirm tonight.

**1970cstblazer** · 08-29-2023, 10:02 AM

Still interested.

**1rippen6** · 08-29-2023, 10:05 AM

Quote:

Originally Posted by 1970cstblazer

Still interested.

Sorry, I forgot about this, I'll get them pulled out tonight.

**1rippen6** · 08-29-2023, 08:24 PM

Here's 15 so 30 plus 6 dollars shipping

**1970cstblazer** · 08-30-2023, 07:34 AM

PM sent

**1970cstblazer** · 09-03-2023, 11:09 AM

Received. Thank you!

08-03-2023, 11:46 AM	#1
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	WTB Blazer trim screw cup washers I am looking for at least 10 of these guys used on the vinyl covered cardboard rear interior panels on CST trim level Blazers. I believe they are made out of stainless steel, since they seem to survive better than anything else surrounding them. I have a source for the correct self drilling/self tapping chrome trim screws, just need the screw cup washers. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

08-04-2023, 05:10 PM	#2
jimmy70 Senior Member Join Date: Aug 2007 Location: Warren,Michigan Posts: 1,148	Re: WTB Blazer trim screw cup washers This same category dated 7/26 Free blazer quarter panel interiors / maybe he'll pop them out and help you out. marko

08-05-2023, 12:24 AM	#4
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	Re: WTB Blazer trim screw cup washers Thanks for the link. I inquired with the poster. We shall see. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

08-05-2023, 08:27 AM	#5
jimmy70 Senior Member Join Date: Aug 2007 Location: Warren,Michigan Posts: 1,148	Re: WTB Blazer trim screw cup washers Wish you luck!

08-05-2023, 12:54 PM	#6
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 3,999	Re: WTB Blazer trim screw cup washers These work also. https://www.ebay.com/itm/254482845360

08-05-2023, 01:02 PM	#7
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: WTB Blazer trim screw cup washers How would you even reuse these? Could you find a similar rivet? Attached Images Last edited by Tuff Gong; 08-05-2023 at 01:46 PM.

08-10-2023, 11:38 AM	#8
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	Re: WTB Blazer trim screw cup washers Still looking for these. Someone has to have a crappy panel laying around. Still can't get even a response about the ones in TX. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

08-19-2023, 10:42 AM	#9
rwjtexas Junior Member Join Date: Jan 2023 Location: Beaumont Posts: 60	Re: WTB Blazer trim screw cup washers Good Morning, Have you thought about going to the salvage yard and using the screws that hold the carpet trim screws to the door bottoms of upper end trucks, Suburban's, and Blazers ? I believe they are the same type of screw from the factory. I may have some available, I have to look. Every time I go to the salvage yard, I try to get little things like this that are hard to find. The Screws should be a #8 oval head and can be replaced. It appears the Conical Washer is the main thing you are needing.

08-20-2023, 09:23 PM	#10
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	Re: WTB Blazer trim screw cup washers Still looking.. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

08-21-2023, 07:31 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: WTB Blazer trim screw cup washers I'll get a picture of what I have tomorrow

08-22-2023, 10:14 PM	#13
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: WTB Blazer trim screw cup washers I have more, this is what was in the first bag. Attached Images

08-23-2023, 08:22 AM	#14
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	Re: WTB Blazer trim screw cup washers Those are perfect. LMK how much and how to pay. Thanks! __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

08-23-2023, 10:28 AM	#16
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,955	Re: WTB Blazer trim screw cup washers If rippen doesn’t have the amount you need, I probably have enough to make up the difference __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

08-24-2023, 07:17 AM	#17
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	Re: WTB Blazer trim screw cup washers I will need at least 10, but I will probably err on the side of caution and obtain 15. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

08-29-2023, 10:02 AM	#19
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	Re: WTB Blazer trim screw cup washers Still interested. __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels



Register or Log In To remove these advertisements.

08-29-2023, 08:24 PM	#21
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,782	Re: WTB Blazer trim screw cup washers Here's 15 so 30 plus 6 dollars shipping Attached Images

08-30-2023, 07:34 AM	#22
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	Re: WTB Blazer trim screw cup washers PM sent __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

09-03-2023, 11:09 AM	#23
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,655	Re: WTB Blazer trim screw cup washers Received. Thank you! __________________ 1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels

Register or Log In To remove these advertisements.