Replacing my Bed Wood

[old51sedan]

Originally Posted by 67C10Step

I bought the pre-made kit from Mar K, so the mounting bolt holes were already there and I just went with them. Only tip I have is to lay it out multiple times until you are happy with everything. I also did the gas tank relocation so had to allow for the fuel fill.

In retrospect, I wish I had gone a little less on the wood finish as now I don't really want to put much in the bed. When the truck gets fully painted I may elect to go another route. Currently, the bed is just in epoxy primer while I chose a final color for the truck.

I also relocated my tank to the rear as well, this is a picture of the fuel fill.