1980 Short Stepper Budget Build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jaysonb · 07-01-2016, 11:50 PM

Quote:

Originally Posted by UKNOWME

What was your method on upholstering the dash pad?

I use a 4 way stretch upholstery vinyl. It's stretched around the top, and glued around the back side. I use the same stuff for the door panels. Works well, I used the same stuff on my k10, and it has held up very well.

UKNOWME · 07-02-2016, 12:05 AM

Quote:

Originally Posted by Jaysonb

I use a 4 way stretch upholstery vinyl. It's stretched around the top, and glued around the back side. I use the same stuff for the door panels. Works well, I used the same stuff on my k10, and it has held up very well.

Do you have any before pics of the dash? Just curious how bad it was. What prep work did you do?

Jaysonb · 07-02-2016, 12:53 AM

I didn't take any before pics. It was pretty cracked up, all I did was trim around the cracks, the vinyl stretches over the cracks.

Jaysonb · 07-09-2016, 11:23 PM

Got the truck all done. Me and the wife drove it around all day today, it was awesome. This afternoon a friend came over to check the truck out, and we went for a ride, and ended up shooting a little video. It was fun!

https://youtu.be/F0B_LWj6E2Q

Jaysonb · 07-09-2016, 11:58 PM

Here are a few pics.

Jaysonb · 07-10-2016, 12:01 AM

Few more.

Bill Bloggins · 07-10-2016, 10:49 AM

Somebody in MN done built my dream stepper! Fantastic job, you show that square bodies rule.

cable666guy · 04-07-2018, 09:33 PM

That came out really nice !!

Shifty One · 12-20-2023, 05:48 PM

I know, I know, olde thread.....but that's a beauty!

LT7A · 12-21-2023, 06:53 PM

Agreed. Wish Jayson still posted here. He always had a cool project going for himself or someone else.

07-02-2016, 12:53 AM	#103
Jaysonb Registered User Join Date: May 2009 Location: Good Thunder Mn. Posts: 955	Re: 1980 Short Stepper Budget Build I didn't take any before pics. It was pretty cracked up, all I did was trim around the cracks, the vinyl stretches over the cracks.

07-09-2016, 11:23 PM	#104
Jaysonb Registered User Join Date: May 2009 Location: Good Thunder Mn. Posts: 955	Re: 1980 Short Stepper Budget Build Got the truck all done. Me and the wife drove it around all day today, it was awesome. This afternoon a friend came over to check the truck out, and we went for a ride, and ended up shooting a little video. It was fun!https://youtu.be/F0B_LWj6E2Q

07-09-2016, 11:58 PM	#105
Jaysonb Registered User Join Date: May 2009 Location: Good Thunder Mn. Posts: 955	Re: 1980 Short Stepper Budget Build Here are a few pics. Attached Images

07-10-2016, 12:01 AM	#106
Jaysonb Registered User Join Date: May 2009 Location: Good Thunder Mn. Posts: 955	Re: 1980 Short Stepper Budget Build Few more. Attached Images

07-10-2016, 10:49 AM	#107
Bill Bloggins Registered User Join Date: Nov 2013 Location: Long Beach Posts: 4	Re: 1980 Short Stepper Budget Build Somebody in MN done built my dream stepper! Fantastic job, you show that square bodies rule.

04-07-2018, 09:33 PM	#108
cable666guy Registered User Join Date: Sep 2008 Location: Willow Grove, PA Posts: 299	Re: 1980 Short Stepper Budget Build That came out really nice !!

12-20-2023, 05:48 PM	#109
Shifty One Registered User Join Date: Dec 2014 Location: Tucson, AZ Posts: 742	Re: 1980 Short Stepper Budget Build I know, I know, olde thread.....but that's a beauty! __________________ 1987 V20 farm-hand rescue 1998 C2500 lot-rot rescue

12-21-2023, 06:53 PM	#110
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,619	Re: 1980 Short Stepper Budget Build Agreed. Wish Jayson still posted here. He always had a cool project going for himself or someone else.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.