Still need trim clips... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MrGoodpliers · 08-13-2004, 08:03 AM

I'm still looking for upper trim clips for '69 short fleet, push-in and screw-in type. Tried repos, but no good. HEEELLLLPPPP!!!!!!!

**Tim Christian** · 08-13-2004, 08:12 PM

I have a set on a NOS set of upper bed trim but they are the stick on type from GM it will probably be hard to find NOS push-in and screw-in type.

MrGoodpliers · 08-16-2004, 07:37 AM

Heck, I'm not looking for NOS, I'd love to have some originals. They could even be a little crusty as long as the spring is still there and they HOLD THE TRIM ON, unlike these repos!

billsbowtie · 08-16-2004, 07:15 PM

do you have a pic. of what you need i may have a few

MrGoodpliers · 08-17-2004, 08:09 AM

I need 1 point for the front fender, 19 push-ins (center in pic) and 16 bolt-ons (the one pictured is missing the spring).

cwilli84 · 08-17-2004, 08:15 AM

Try Mothertruckers, I needed the tip one also and he said he might have some. Also look online for CJ fastener they usually have lotsa automotive trim fasteners. Good luck

billsbowtie · 08-17-2004, 11:21 PM

i no i dont have that many but i will check to see what i have thanks

billsbowtie · 08-18-2004, 09:00 PM

i didn't have anything that would help you sorry

MrGoodpliers · 08-19-2004, 07:37 AM

Thanks for looking... I ordered some yesterday from Modern Chevrolet, a dealership in N.C. with an extensive classic parts dept. Get out your checkbook, though, the push-in clips are $3.21 each! But, these are genuine GM so they'll do the job. Check them out at www.oldmusclecars.com or call 1.800.722.4828.

08-13-2004, 08:03 AM	#1
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Still need trim clips... I'm still looking for upper trim clips for '69 short fleet, push-in and screw-in type. Tried repos, but no good. HEEELLLLPPPP!!!!!!! __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

08-16-2004, 07:37 AM	#3
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Heck, I'm not looking for NOS, I'd love to have some originals. They could even be a little crusty as long as the spring is still there and they HOLD THE TRIM ON, unlike these repos! __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

08-17-2004, 08:09 AM	#5
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	I need 1 point for the front fender, 19 push-ins (center in pic) and 16 bolt-ons (the one pictured is missing the spring). Attached Images __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

08-17-2004, 08:15 AM	#6
cwilli84 1FINE69 Join Date: Aug 2003 Location: Detroit, Michigan Posts: 239	Clips Try Mothertruckers, I needed the tip one also and he said he might have some. Also look online for CJ fastener they usually have lotsa automotive trim fasteners. Good luck __________________ Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD

08-19-2004, 07:37 AM	#9
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Thanks for looking... I ordered some yesterday from Modern Chevrolet, a dealership in N.C. with an extensive classic parts dept. Get out your checkbook, though, the push-in clips are $3.21 each! But, these are genuine GM so they'll do the job. Check them out at www.oldmusclecars.com or call 1.800.722.4828. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

08-13-2004, 08:12 PM	#2
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I have a set on a NOS set of upper bed trim but they are the stick on type from GM it will probably be hard to find NOS push-in and screw-in type.

08-16-2004, 07:15 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	do you have a pic. of what you need i may have a few

08-17-2004, 11:21 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i no i dont have that many but i will check to see what i have thanks

08-18-2004, 09:00 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	i didn't have anything that would help you sorry



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.