PA 1968 C20 partout

[D-n-Tyke]

Originally Posted by Burnsy01

I checked on it tonight and it was completely gone. I have another truck coming this weekend. I will check it and let you know.

Thank you
Nick

Gotcha. Appreciate it.

[Bigk5]

been looking for rh inner fender if not rotted out at the radiator support been looking for
a good oem thanks

[D-n-Tyke]

Originally Posted by Burnsy01

I checked on it tonight and it was completely gone. I have another truck coming this weekend. I will check it and let you know.

Thank you
Nick

Any success with the second truck this weekend?

[Burnsy01]

Originally Posted by D-n-Tyke

Any success with the second truck this weekend?

I will check tonight ! Sorry I just didn't get that far yet.


Thank you

[bddcustoms]

Looking 67/68 for side molding trim pieces:
both doors
both cab corners
both bed sides
one rear wheel arch

Let me know if you can help

Originally Posted by Burnsy01

This ones a little rough folks. 68 C20 , 250 3 on the tree. Anything you can see is up for grabs but to hit the big points-


250 Motor/ Tranny- supposedly ran before they pulled the carb. $300

HO rear end- unknown ratio but it isnt frozen up. $150

Tailgate- rough , slightly bent on the inside, and rusty on the bottom seam but would be good for a beater truck or a bench maybe??? $125

Hood- Inside structure is actually in really good shape, starting to have some rust issues. Is dented, once again good for a beater $50

Hood hinges- good shape $65+ shipping

Radio dash cut $80+ shipping



Located in Conneaut Lake pa, many other parts available

[Burnsy01]

Originally Posted by bddcustoms

Looking 67/68 for side molding trim pieces:
both doors
both cab corners
both bed sides
one rear wheel arch

Let me know if you can help

Hey! I have some of that. Check this thread for pictures of what I have.


https://67-72chevytrucks.com/vboard/...d.php?t=850480

[bddcustoms]

Just PM'd you. Let me know

Thx
DTT

[D-n-Tyke]

Originally Posted by Burnsy01

I will check tonight ! Sorry I just didn't get that far yet.


Thank you

Just checking back in to see if you got a chance to look yet?

[Burnsy01]

Originally Posted by D-n-Tyke

Just checking back in to see if you got a chance to look yet?

Hey sorry I responded but it apparently didn't send. This one is in rough shape.



Nick Burns

[D-n-Tyke]

Originally Posted by Burnsy01

Hey sorry I responded but it apparently didn't send. This one is in rough shape.



Nick Burns

So both cabs a junk right there?

Dang it. Thanks for looking.

[botmfedr1]

Do you have the steering gear mounting bolts? Should be 4 if I’m not mistaken .

[Burnsy01]

Originally Posted by botmfedr1

Do you have the steering gear mounting bolts? Should be 4 if I’m not mistaken .

Good morning, the frame to steering box bolts?

[botmfedr1]

Yessir,
I believe there’s 4? Frame to gear box..