Here we go again... The Tumbleweed 69 K10 Shorty - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Louisvillekytruck** · 07-25-2023, 11:15 AM

Looking good tyler

57taskforce · 07-28-2023, 12:38 AM

Thanks, it’s back in the shop now waiting on some time to start welding. This is going to be the very last project for this shop as it is soon to be sold by the company I work for. I’m bummed about that. I’ve had a lot of great memories in there over the last 8 years.

**Dieselwrencher** · 11-02-2023, 06:29 AM

Were you able to get anymore work done on it before they closed shop?

57taskforce · 11-24-2023, 10:37 AM

lol, well they haven’t sold it yet and haven’t pushed me at all to get the last of my stuff out of there yet… so the Camaro SS and the K10 are both still there. I’m about half done on the welding work on the frame. Life just got busy and I haven’t had time to finish it. I’m hoping to have it done in the next couple weeks.

57taskforce · 12-17-2023, 06:27 PM

I got about 95% of the welding work done to the front of the frame. I am pretty happy with how it turned out. I need another hour or so with the flap disk to clean some stuff up, then some paint. I’m going to add the ord steering box brace to it as well.

Dirt's72 · 04-13-2024, 10:18 AM

Somehow I missed this thread. Nice to see you making some progress on this truck.

07-25-2023, 11:15 AM	#26
Louisvillekytruck Senior Member Join Date: Jun 2019 Location: Louisville ky Posts: 1,108	Re: Here we go again... The Tumbleweed 69 K10 Shorty Looking good tyler

07-28-2023, 12:38 AM	#27
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,485	Re: Here we go again... The Tumbleweed 69 K10 Shorty Thanks, it’s back in the shop now waiting on some time to start welding. This is going to be the very last project for this shop as it is soon to be sold by the company I work for. I’m bummed about that. I’ve had a lot of great memories in there over the last 8 years. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

11-02-2023, 06:29 AM	#28
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Here we go again... The Tumbleweed 69 K10 Shorty Were you able to get anymore work done on it before they closed shop? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-24-2023, 10:37 AM	#29
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,485	Re: Here we go again... The Tumbleweed 69 K10 Shorty lol, well they haven’t sold it yet and haven’t pushed me at all to get the last of my stuff out of there yet… so the Camaro SS and the K10 are both still there. I’m about half done on the welding work on the frame. Life just got busy and I haven’t had time to finish it. I’m hoping to have it done in the next couple weeks. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

12-17-2023, 06:27 PM	#30
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,485	Re: Here we go again... The Tumbleweed 69 K10 Shorty I got about 95% of the welding work done to the front of the frame. I am pretty happy with how it turned out. I need another hour or so with the flap disk to clean some stuff up, then some paint. I’m going to add the ord steering box brace to it as well. Attached Images __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

04-13-2024, 10:18 AM	#31
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: Here we go again... The Tumbleweed 69 K10 Shorty Somehow I missed this thread. Nice to see you making some progress on this truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.