I am wanting opinions about buying a Motor

[Rickysnickers]

Originally Posted by kwmech

The biggest issue I have with crate engines is that they all seem to be built for racing. How about a 383 that will give you performance and torque with a lower rpm band and still be TBI and smog test friendly. Don't need 10-1 and .500 lift cam to get almost double what a factory tbi was back in the early 90s

Some truth to this. If Larry is really interested in a Blueprint model, it may be worth a call to see if a bit smaller cam can be installed for his intended purpose.

[biketopia]

Originally Posted by Rickysnickers

Some truth to this. If Larry is really interested in a Blueprint model, it may be worth a call to see if a bit smaller cam can be installed for his intended purpose.

Blueprint will not sub out any part on their builds. I tried to get them to swap a water pump on a SBF application ordered directly through them. No luck, was a mute point as the car had the wrong stuff anyways and the engine came with what was needed to make it right.

[Rickysnickers]

Originally Posted by biketopia

Blueprint will not sub out any part on their builds. I tried to get them to swap a water pump on a SBF application ordered directly through them. No luck, was a mute point as the car had the wrong stuff anyways and the engine came with what was needed to make it right.

Oh, ok thank you for this. I didn't know that, but suspected that was the case.