How about some pics of bagged 47-59 - Page 43 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

e015475 · 05-31-2021, 06:07 PM

Not sure if you're asking about the color of my truck - the '49 GMC earlier in this thread, but if you are, it is FIAT 'Verde' from their 500s they came out with a few years ago, shot in 2K Matrix paint.

nikwho · 06-07-2021, 05:48 PM

Quote:

Originally Posted by e015475

Not sure if you're asking about the color of my truck - the '49 GMC earlier in this thread, but if you are, it is FIAT 'Verde' from their 500s they came out with a few years ago, shot in 2K Matrix paint.

Crazy! That's the exact color I'm spraying my '59! It's a cool color. I was super close to spraying my '68 GMC that color, but felt it didn't fit. Though, I feel like it looks like a different shade every time I take a picture of it! The following 5 pictures are of the same panel, just in different lighting situations. I tried the red that you see on the dash, too, and wish I went with that. I ultimately used the new Toyota Cement Metallic Grey. I may go with that red for my '59 and use this Verde Chiaro Light Green from the Fiats on a '48 5 window that I just picked up.

nikwho · 06-07-2021, 05:55 PM

Sorry, didn't mean to post off topic. Here's my '59. It's pretty low.

**youngrodder** · 06-16-2021, 07:40 AM

Stock frame with Porterbuilt Fab goodies.

Marc

omarsphatt · 06-16-2021, 09:24 AM

'78 Caddy Seville subframe & modified '68 Chevy trailing arm rear suspension

lower50's · 06-17-2021, 07:02 AM

Quote:

Originally Posted by omarsphatt

'78 Caddy Seville subframe & modified '68 Chevy trailing arm rear suspension

How much did you shorten the box?

omarsphatt · 06-18-2021, 12:19 PM

Quote:

Originally Posted by lower50's

How much did you shorten the box?

About a foot - the most I could and still have the fenders fit between the stake pockets. You can't tell from that pic but I increased the width of the bed about a foot to push the fenders out to clear the tires too.

SFFD103 · 07-31-2021, 05:56 PM

Here’s a photo of my “Norma Jean.” It’s a 54’ and I bought it from my neighbor who had it in his family since it was new. Heidt’s IFS, 4 wheel disc brakes, 4” C notch, 525 HP built 6.0L/4L80E, Holley Terminator X Max, Ford 9”, 3:73 gears, and more.

thaBrad · 05-04-2023, 11:44 AM

Named her "Rona" since I built her during Covid out of boredom.

'52 LS swap, 4L60e, 9" rear, 4-link, Accuair VU-4, buckets, single piece windshield (hate), PS, PB, elec fan, OEM brass radiator, rear gas tank, C-6 gas rump/reg setup, Thrust 18/20 wheel setup, widened rear fenders

And a scale model for more fun

**Rickysnickers** · 05-05-2023, 09:29 AM

Nice first post! Welcome!

lower50's · 05-10-2023, 09:38 AM

Quote:

Originally Posted by thaBrad

Named her "Rona" since I built her during Covid out of boredom.

'52 LS swap, 4L60e, 9" rear, 4-link, Accuair VU-4, buckets, single piece windshield (hate), PS, PB, elec fan, OEM brass radiator, rear gas tank, C-6 gas rump/reg setup, Thrust 18/20 wheel setup, widened rear fenders

And a scale model for more fun

Nice truck!
Why do you hate the one piece windshield?

**youngrodder** · 05-10-2023, 10:33 AM

Quote:

Originally Posted by lower50's

Nice truck!
Why do you hate the one piece windshield?

Guessing the visibility across the bend. I understand that is creates quite a distortion of your view.

Marc

thaBrad · 05-15-2023, 01:04 PM

Yes the bend creates a distortion, its not horrible but its there. Plus I like the look of the two piece.

lgh1157 · 07-18-2024, 09:45 AM

For sale

05-31-2021, 06:07 PM	#1051
e015475 Registered User Join Date: Nov 2013 Location: Show Low, Arizona Posts: 778	Re: How about some pics of bagged 47-59 Not sure if you're asking about the color of my truck - the '49 GMC earlier in this thread, but if you are, it is FIAT 'Verde' from their 500s they came out with a few years ago, shot in 2K Matrix paint.

06-07-2021, 05:55 PM	#1053
nikwho Registered User Join Date: Apr 2010 Location: Flagstaff, AZ Posts: 974	Re: How about some pics of bagged 47-59 Sorry, didn't mean to post off topic. Here's my '59. It's pretty low. Attached Images __________________ '59 Apache - 383" SBC/TH-350 '68 GMC - BBC/TH400

06-16-2021, 07:40 AM	#1054
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,774	Re: How about some pics of bagged 47-59 Stock frame with Porterbuilt Fab goodies. Marc Attached Images __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

06-16-2021, 09:24 AM	#1055
omarsphatt Registered User Join Date: Apr 2008 Location: Pollock Pines, CA Posts: 14	Re: How about some pics of bagged 47-59 '78 Caddy Seville subframe & modified '68 Chevy trailing arm rear suspension Attached Images __________________ '41 Chevy Special Deluxe Coupe '49 Chevy 3100 Flatbed '52 Chevy Styleline 2dr Sedan '61 Corvair Loadside '63 Pontiac Catalina Safari 9 passenger '65 Mustang Coupe '72 Chevy K10

07-31-2021, 05:56 PM	#1058
SFFD103 Registered User Join Date: Nov 2017 Location: Bay Area, CA Posts: 29	Re: How about some pics of bagged 47-59 Here’s a photo of my “Norma Jean.” It’s a 54’ and I bought it from my neighbor who had it in his family since it was new. Heidt’s IFS, 4 wheel disc brakes, 4” C notch, 525 HP built 6.0L/4L80E, Holley Terminator X Max, Ford 9”, 3:73 gears, and more. Attached Images

05-04-2023, 11:44 AM	#1059
thaBrad Registered User Join Date: Sep 2020 Location: Columbus, IN Posts: 3	Re: How about some pics of bagged 47-59 Named her "Rona" since I built her during Covid out of boredom. '52 LS swap, 4L60e, 9" rear, 4-link, Accuair VU-4, buckets, single piece windshield (hate), PS, PB, elec fan, OEM brass radiator, rear gas tank, C-6 gas rump/reg setup, Thrust 18/20 wheel setup, widened rear fenders And a scale model for more fun Attached Images Last edited by Rickysnickers; 05-05-2023 at 09:32 AM.

05-05-2023, 09:29 AM	#1060
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,067	Re: How about some pics of bagged 47-59 Nice first post! Welcome!

05-15-2023, 01:04 PM	#1063
thaBrad Registered User Join Date: Sep 2020 Location: Columbus, IN Posts: 3	Re: How about some pics of bagged 47-59 Yes the bend creates a distortion, its not horrible but its there. Plus I like the look of the two piece.

07-18-2024, 09:45 AM	#1064
lgh1157 Registered User Join Date: Aug 2008 Location: atlanta GA Posts: 73	Re: How about some pics of bagged 47-59 For sale Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.