67 grill bowtie question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Peanut74 · 07-17-2024, 08:46 AM

Ok, I have finally got off my butt and am working to finish up my truck. I am currently working on getting the grill assembly done but ran into a possible issue. When I went to put the bowtie emblem on it didn't fit flush. My question is do I have the correct emblem or not?

**HO455** · 07-17-2024, 09:07 AM

It looks correct to me. I don't remember them being particularly tight fitting. So vague and lose that you can bolt them on upside down.

Peanut74 · 07-17-2024, 01:30 PM

Thanks HO. The black paint tells me it came off my '67. But the fit was just bad I was wondering if I had the right one or not

**68bowtie** · 07-17-2024, 03:31 PM

Mine looks like that too. It’s secured well but big gaps.

**NGN** · 07-17-2024, 11:13 PM

My bowtie on my 67 original steel painted grill loops fit perfectly, the same with my sons 67 bowtie fit perfectly with the original steel grill loops. We replaced his original steel loops cuase they were rusted beyond repair, so we decided to replace with after market well long story short, original bowtie is not a perfect fit.

**68bowtie** · 07-17-2024, 11:38 PM

Hmm interesting.

OEM grille, OEM steel hoops, OEM emblem. Nice and tight.

Name: IMG_6322.jpg
Views: 109
Size: 22.6 KB

OEM grille, OEM chromed hoops, OEM emblem. Nice and tight.

Name: IMG_6321.jpg
Views: 116
Size: 33.2 KB

OEM grille, reproduction chromed hoops, OEM emblem. Big gaps.

Name: IMG_6317.jpg
Views: 116
Size: 61.7 KB

Peanut74 · 07-19-2024, 11:23 PM

I wish I would have kept my old trim to see what the fit would be. But it was so beat-up it probably wouldn't help me at all.

**NGN** · 07-20-2024, 11:13 AM

Yes 68bowtie in your first picture with the original steel loops like mine and my sons that was the fit, pretty much snug. In the second photo with the original chrome, not sure of the metal material my friends two original 68 have the same snug fit. In the third phone with the after market aluminum (?) trim, same not snug at all, though the trim looks the same it's off by some so the bowtie doesn't fit snug. I first thought maybe to move the trim apart to get the bowtie in more but makes the trim not look straight. The bowtie is hopefully bolted tight enough with no future problems, will keep a eye on it. From what I upstanding there only one company producing these. Peanut74 , yeah I kept my old rusted trim, there straight but a bit rusted maybe
they can be save by an experience wielder that would take on the challenge ($$) Thanks for the pics 68bowtie.

07-17-2024, 08:46 AM	#1
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	67 grill bowtie question Ok, I have finally got off my butt and am working to finish up my truck. I am currently working on getting the grill assembly done but ran into a possible issue. When I went to put the bowtie emblem on it didn't fit flush. My question is do I have the correct emblem or not? Attached Images __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

07-17-2024, 09:07 AM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,267	Re: 67 grill bowtie question It looks correct to me. I don't remember them being particularly tight fitting. So vague and lose that you can bolt them on upside down. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

07-17-2024, 01:30 PM	#3
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: 67 grill bowtie question Thanks HO. The black paint tells me it came off my '67. But the fit was just bad I was wondering if I had the right one or not __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

07-17-2024, 03:31 PM	#4
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,737	Re: 67 grill bowtie question Mine looks like that too. It’s secured well but big gaps. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

07-17-2024, 11:13 PM	#5
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 832	Re: 67 grill bowtie question My bowtie on my 67 original steel painted grill loops fit perfectly, the same with my sons 67 bowtie fit perfectly with the original steel grill loops. We replaced his original steel loops cuase they were rusted beyond repair, so we decided to replace with after market well long story short, original bowtie is not a perfect fit.

07-17-2024, 11:38 PM	#6
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,737	Re: 67 grill bowtie question Hmm interesting. OEM grille, OEM steel hoops, OEM emblem. Nice and tight. OEM grille, OEM chromed hoops, OEM emblem. Nice and tight. OEM grille, reproduction chromed hoops, OEM emblem. Big gaps. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

07-19-2024, 11:23 PM	#7
Peanut74 Registered User Join Date: May 2018 Location: Prattville, AL Posts: 611	Re: 67 grill bowtie question I wish I would have kept my old trim to see what the fit would be. But it was so beat-up it probably wouldn't help me at all. __________________ -------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk"

07-20-2024, 11:13 AM	#8
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 832	Re: 67 grill bowtie question Yes 68bowtie in your first picture with the original steel loops like mine and my sons that was the fit, pretty much snug. In the second photo with the original chrome, not sure of the metal material my friends two original 68 have the same snug fit. In the third phone with the after market aluminum (?) trim, same not snug at all, though the trim looks the same it's off by some so the bowtie doesn't fit snug. I first thought maybe to move the trim apart to get the bowtie in more but makes the trim not look straight. The bowtie is hopefully bolted tight enough with no future problems, will keep a eye on it. From what I upstanding there only one company producing these. Peanut74 , yeah I kept my old rusted trim, there straight but a bit rusted maybe they can be save by an experience wielder that would take on the challenge ($$) Thanks for the pics 68bowtie.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.