The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-24-2024, 06:22 PM   #1
aotte1
Registered User
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,645
1983 K10 windshield Washer Tank Pump Mod

Question on modifying/replacing the windshield washer pump for a 1983 K10 from wiper motor to 1986 washer tank. Think pump on tank started in 1984 with wiper/washer control move to column stick from dash.
Can I modify the 1983 washer activation wiring, for use with a newer tank/pump set up?

Photos of 1983 windshield washer pump below. The two wires on the right are one pink and other white. The two wires on left are black with a blue strip, and other color ?? gray, green ?

The pump on tank wiring maybe two wires a pink and a white. Last photo is of pump on tank for squarebody.

Have not purchased newer tank and pump yet, to do any testing. Hoping somebody has already researched/implemented this pump wiring change.
Attached Images
   

Last edited by aotte1; 07-24-2024 at 06:53 PM.
aotte1 is offline   Reply With Quote
Old 07-24-2024, 08:13 PM   #2
Dead Parrot
Registered User
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,610
Re: 1983 K10 windshield Washer Tank Pump Mod

I did this on my 75. One of the two wires that go to the existing pump also runs to the washer button in the cab. The button grounds that wire. I connected that wire to one side of a relay coil so pressing the button activates the relay. The other side of the relay coil goes to +12v as does one side of the NO relay contacts. The other side of the NO contact goes to the +12 side of the washer motor. On the washer tank/motor combo I have, the white is the +12 and the red is ground.

The OEM pump colors on my 75 are different then your 83. Test yours with a VOM.

You could skip the relay but I don't know the current capacity of the OEM washer switch. It is designed to be a momentary contact and the OEM washer gizmo does the rest of the magic. The relay is cheap insurance against having to replace the OEM washer switch due to over current.

You may have to drill one hole on the fender wall if the OEM tank is a different width then the combo tank.
Dead Parrot is offline   Reply With Quote
Old 07-25-2024, 02:23 PM   #3
aotte1
Registered User
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,645
Re: 1983 K10 windshield Washer Tank Pump Mod

Dead Parrot, thanks for information on how to do this swap.

Les
aotte1 is offline   Reply With Quote
Old 07-25-2024, 09:20 PM   #4
aotte1
Registered User
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,645
Re: 1983 K10 windshield Washer Tank Pump Mod

Following “Dead Parrot” suggestion for washer pump motor mod, order relay kit from Summit:
-
Summit Racing SUM-RP20466 - Summit Racing™ Direct-Fit AutoFuse Restoration Series Relay and Connector Kits

Part Number: SUM-RP20466

Now knowing how to do pump mod, found a new nos tank, and GM pump motor from RockAuto.
The original 1983 tank is cooked from desert life, it is disintegrating into many many pieces, if get even close to it.
Attached Images
 

Last edited by aotte1; 07-25-2024 at 09:32 PM.
aotte1 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com