Np205/6l90e mount problem

[1972ochre4x4]

Not sure if a 4x4 question or a lsx question

I have a 1972 k10 with 6l90e and a np205. I have advance adapters adapter. But the mount doesn’t seem to line up with mounts on crossmember, before I modify or make a spacer am I doing something wrong? Does anyone have a picture of theirs?

[1972ochre4x4]

Where it hits mount

[Richard]

Originally Posted by 1972ochre4x4

Where it hits mount

There are some pics of what I did in my build thread. Transfercase install starts on page 11. I made an adapter that raised the t-case up. Engine and trans would angle down to much without it. Also t-case would not bolt up. Actually had to modify the one I made originally and make it taller.
Edit- The initial version of the mount adapter is on page 7 post 163