67-68 factory steering wheel colors - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Getter-Done** · 01-13-2019, 05:39 PM

Found a Picture of mine.
Name: cab.jpg
Views: 677
Size: 43.4 KB

**Canuckvetter** · 01-13-2019, 07:15 PM

I'm pretty sure Black was available in the GMC's in 67. Eric Johnson's and GMCkid's 32 mile truck are Fawn with black column and steering wheel.

**'68OrangeSunshine** · 01-14-2019, 05:48 PM

Quote:

Originally Posted by 68bowtie

...

And Fawn

But I’m not convinced about the turquoise or the black. Any documentation on those?

Also was there a dark green?

Attachment 1864419

One man's 503 Lt Green is another man's turquoise, I think.
I have a ''turquoise'' wheel on my Fawn truck, since I'm rebuilding the original wheel. I've also heard the color called ''Seafoam Green''.
And, just for the heck of it, here's my all Fawn '67 Suburban interior.

Eric Johnson · 01-14-2019, 07:51 PM

Another pic ...

**Eagle9502** · 01-16-2019, 10:08 PM

Quote:

Originally Posted by Canuckvetter

I'm pretty sure Black was available in the GMC's in 67. Eric Johnson's and GMCkid's 32 mile truck are Fawn with black column and steering wheel.

I also believe black was available in the GMCs only.

Andy4639 · 01-18-2019, 12:21 PM

This one was in the 67 ramp truck when I bought it.
I haven't unwrapped it yet.

tim_mc · 06-04-2019, 10:05 PM

I have a '67 C20 503 light green exterior with what appears to be 510 turquoise poly/metallic interior and steering wheel. Turquoise poly isn't an interior option listed for '67, but I'm fairly sure that's what it is. I recently replaced my driver's door with a '69 503 light green with the same patina and West Coast JV mirror ...lucky find. Thanks to Huey's Hot Rod (Lynn Huyear) in Carlinville, IL. The difference between the '69 door and the '67 door panel is obvious. The trans tunnel really shows off the poly metallic paint. Pics of the '69 LH door and original '67 RH door attached.

**michael bustamante** · 06-04-2019, 11:31 PM

Black was not an option on these 67-68 wheels as far as I know.
I do know they are black in aftermarket. Saw one here at a restoration shop. Wanted over 330.00 for it.
Also there was the orangish wheels. 516 I think

68blue910 · 06-04-2019, 11:53 PM

Quote:

Originally Posted by 68panelman

Maybe a picture would help

Is that the factory wheel ??? I need this so bad. Mine is this color interior but a dark blue steering wheel

**68bowtie** · 06-05-2019, 12:22 AM

Quote:

Originally Posted by 68blue910

Is that the factory wheel ??? I need this so bad. Mine is this color interior but a dark blue steering wheel

You’re looking for light green.

**special-K** · 06-05-2019, 06:42 AM

I question the black steering wheel and column in Eric's truck being original. They should be fawn like everything else.

Quote:

Originally Posted by tim_mc

I have a '67 C20 503 light green exterior with what appears to be 510 turquoise poly/metallic interior and steering wheel. Turquoise poly isn't an interior option listed for '67, but I'm fairly sure that's what it is. I recently replaced my driver's door with a '69 503 light green with the same patina and West Coast JV mirror ...lucky find. Thanks to Huey's Hot Rod (Lynn Huyear) in Carlinville, IL. The difference between the '69 door and the '67 door panel is obvious. The trans tunnel really shows off the poly metallic paint. Pics of the '69 LH door and original '67 RH door attached.

I don't have a paint code, but the '67s and some early '68s got the inside of the cab painted to go with trim color selected, same as preceding years. That metallic green isn't found in the exterior paint codes. I believe all that has been pulled up in a thread here somewhere. Someone will have the code handy. Could start a thread if you don't get help here.

Metaldoc · 06-05-2019, 10:34 PM

Some interior colors I found

projectking · 06-06-2019, 08:13 PM

Quote:

Originally Posted by special-K

I question the black steering wheel and column in Eric's truck being original. They should be fawn like everything else.

I don't have a paint code, but the '67s and some early '68s got the inside of the cab painted to go with trim color selected, same as preceding years. That metallic green isn't found in the exterior paint codes. I believe all that has been pulled up in a thread here somewhere. Someone will have the code handy. Could start a thread if you don't get help here.

It’s not black, or not sopposed to be. My ‘67 GMC has a dark grey wheel and column which is unique to ‘67 GMC’s

**68bowtie** · 02-01-2020, 12:37 PM

Here’s a side by side comparison of 68 chevy fawn and 67 gmc which is a dark gray. I bet this is what Eric Johnson’s truck has. I recently bought this thinking it would match my 68 interior. Oops.

Name: 2D5515F4-52B7-4468-B66F-BE14951E389F.jpg
Views: 385
Size: 47.7 KB

Name: 2D5515F4-52B7-4468-B66F-BE14951E389F.jpg
Views: 385
Size: 47.7 KB

Name: A0C11491-A70B-4169-8CEC-37059F799FAF.jpg
Views: 392
Size: 47.2 KB

airkore65 · 03-21-2021, 12:30 AM

68 920 interior with functional Delco AM radio.

**Stephen717** · 03-21-2021, 04:35 AM

I don't have any up close pictures but my steering wheel is like a cream color inside and out. I can try to go look at it in a few weeks when I'm back up north to see if there's any other colors showing through it but I'm pretty sure it's just that off white cream color. And unless the heat has gotten to it it should still only have one or two small cracks in it

**'68OrangeSunshine** · 03-21-2021, 07:36 PM

Quote:

Originally Posted by airkore65

68 920 interior with functional Delco AM radio.

Fawn. Pristine example. You can't get a dash pad in Fawn anymore.

eodcoduto · 08-03-2024, 06:35 PM

Any ideas which column and steering wheel colors my pickup had originally with 505 green and no other options?

**'68OrangeSunshine** · 08-03-2024, 06:46 PM

Quote:

Originally Posted by eodcoduto

Any ideas which column and steering wheel colors my pickup had originally with 505 green and no other options?

Seafoam Green.

eodcoduto · 08-03-2024, 09:03 PM

Quote:

Originally Posted by '68OrangeSunshine

Seafoam Green.

Would the dash have been seafoam green as well? Right now it is the 505 dark green.

**'68OrangeSunshine** · 08-03-2024, 09:30 PM

Quote:

Originally Posted by eodcoduto

Would the dash have been seafoam green as well? Right now it is the 505 dark green.

I don't know. Never had a green Chevy. I'm currently using a green wheel until I finish painting my original wheel Fawn.

**58 Special** · 08-04-2024, 02:04 AM

Got an orange one hanging in the basement above the pool table.

**68bowtie** · 08-04-2024, 10:21 AM

Quote:

Originally Posted by 58 Special

Got an orange one hanging in the basement above the pool table.

Could you post a picture?

chewychevy67 · 08-04-2024, 01:18 PM

I'm curious how many 67 wheels were cast in color and how many are black and painted over. I had one of each. 1st picture is of the cast one. The cast one had lots of shrinking but stayed shiny like new paint and the black painted over one had just hairline cracks but the paint was wore where your hands rubbed the wheel and was sun faded

**58 Special** · 08-04-2024, 09:18 PM

Not correct horn button.
Really rough shape. My dad and I pulled it from a truck around 1979.
Been sitting in my Dad's garage until we cleaned out the garage 8 years ago.

01-13-2019, 05:39 PM	#26
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,330	Re: 67-68 factory steering wheel colors Found a Picture of mine. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

01-13-2019, 07:15 PM	#27
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: 67-68 factory steering wheel colors I'm pretty sure Black was available in the GMC's in 67. Eric Johnson's and GMCkid's 32 mile truck are Fawn with black column and steering wheel. __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

01-14-2019, 07:51 PM	#29
Eric Johnson Registered User Join Date: Dec 2018 Location: Millbrook, New York Posts: 88	Re: 67-68 factory steering wheel colors Another pic ... Attached Images __________________ 1967 GMC 3/4 ton custom. 283 4 speed unrestored

01-18-2019, 12:21 PM	#31
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 67-68 factory steering wheel colors This one was in the 67 ramp truck when I bought it. I haven't unwrapped it yet. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

06-04-2019, 10:05 PM	#32
tim_mc Registered User Join Date: Jan 2019 Location: St Peters, MO Posts: 440	Re: 67-68 factory steering wheel colors I have a '67 C20 503 light green exterior with what appears to be 510 turquoise poly/metallic interior and steering wheel. Turquoise poly isn't an interior option listed for '67, but I'm fairly sure that's what it is. I recently replaced my driver's door with a '69 503 light green with the same patina and West Coast JV mirror ...lucky find. Thanks to Huey's Hot Rod (Lynn Huyear) in Carlinville, IL. The difference between the '69 door and the '67 door panel is obvious. The trans tunnel really shows off the poly metallic paint. Pics of the '69 LH door and original '67 RH door attached. Attached Images Last edited by tim_mc; 06-04-2019 at 10:10 PM.

06-04-2019, 11:31 PM	#33
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,857	Re: 67-68 factory steering wheel colors Black was not an option on these 67-68 wheels as far as I know. I do know they are black in aftermarket. Saw one here at a restoration shop. Wanted over 330.00 for it. Also there was the orangish wheels. 516 I think Attached Images __________________ 1967custom

06-05-2019, 10:34 PM	#37
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: 67-68 factory steering wheel colors Some interior colors I found Attached Images __________________ Do it, Do it right, Do it right the first time

02-01-2020, 12:37 PM	#39
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,745	Re: 67-68 factory steering wheel colors Here’s a side by side comparison of 68 chevy fawn and 67 gmc which is a dark gray. I bet this is what Eric Johnson’s truck has. I recently bought this thinking it would match my 68 interior. Oops. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

03-21-2021, 12:30 AM	#40
airkore65 Registered User Join Date: Jan 2021 Location: Vancouver BC Posts: 12	Re: 67-68 factory steering wheel colors 68 920 interior with functional Delco AM radio. Attached Images

03-21-2021, 04:35 AM	#41
Stephen717 Senior Member Join Date: Aug 2016 Location: Loris South Carolina Posts: 429	Re: 67-68 factory steering wheel colors I don't have any up close pictures but my steering wheel is like a cream color inside and out. I can try to go look at it in a few weeks when I'm back up north to see if there's any other colors showing through it but I'm pretty sure it's just that off white cream color. And unless the heat has gotten to it it should still only have one or two small cracks in it Attached Images Last edited by Stephen717; 06-02-2023 at 07:38 PM.

08-03-2024, 06:35 PM	#43
eodcoduto Registered User Join Date: Jul 2017 Location: Twentynine Palms, Ca Posts: 16	Re: 67-68 factory steering wheel colors Any ideas which column and steering wheel colors my pickup had originally with 505 green and no other options? Attached Images

08-04-2024, 02:04 AM	#47
58 Special Junior Member Join Date: Apr 2023 Location: Edmonton,Alberta, Canada Posts: 82	Re: 67-68 factory steering wheel colors Got an orange one hanging in the basement above the pool table.

08-04-2024, 01:18 PM	#49
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,539	Re: 67-68 factory steering wheel colors I'm curious how many 67 wheels were cast in color and how many are black and painted over. I had one of each. 1st picture is of the cast one. The cast one had lots of shrinking but stayed shiny like new paint and the black painted over one had just hairline cracks but the paint was wore where your hands rubbed the wheel and was sun faded Attached Images Last edited by chewychevy67; 08-04-2024 at 01:29 PM.

08-04-2024, 09:18 PM	#50
58 Special Junior Member Join Date: Apr 2023 Location: Edmonton,Alberta, Canada Posts: 82	Re: 67-68 factory steering wheel colors Not correct horn button. Really rough shape. My dad and I pulled it from a truck around 1979. Been sitting in my Dad's garage until we cleaned out the garage 8 years ago. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.