Patina love

[WorldsCrappiestTruck]

Nice work. I wish I’d run my computer under the seat like this.

[oneshotkyle]

Originally Posted by WorldsCrappiestTruck

Nice work. I wish I’d run my computer under the seat like this.

Thanks appreciate the compliments. So far all my wiring is hidden. I will be routing all the front clip wires over fenderwell under fender too

[WorldsCrappiestTruck]

Originally Posted by oneshotkyle

Thanks appreciate the compliments. So far all my wiring is hidden. I will be routing all the front clip wires over fenderwell under fender too

That’s how i did it - turned out clean.

I ran all engine-side wires to the passengers rear of the intake, and drilled a 2.5” hole in the firewall to run everything through a large grommet just behind the passengers head, it’s nicely tucked and hidden but requires running each sensors wires basically individually, back to the ECM.

[oneshotkyle]

Originally Posted by WorldsCrappiestTruck

That’s how i did it - turned out clean.

I ran all engine-side wires to the passengers rear of the intake, and drilled a 2.5” hole in the firewall to run everything through a large grommet just behind the passengers head, it’s nicely tucked and hidden but requires running each sensors wires basically individually, back to the ECM.

I was gonna go right through the firewall behind intake before i came across this bulkhead fitting. Its pretty large and takes a latge flat spot to secure. Thats when i decided to go under seat. Had my fingers crossed all the wiring was long enough

[oneshotkyle]

Hoping for some cooler weather for the weekend. Got lots of small parts back from powder. Driveline ordered

[oneshotkyle]

Got the hydroboost mounted up tonight

[oneshotkyle]

Dash all cleaned up and painted with holley 3.5 mounted. Textured and painted glove box to match.

[oneshotkyle]

Got the LS primed with a weed sprayer today. It displayed 12psi on the holley monitor. Haha. Started building hoses for hydroboost and decided to get the whole front clip painted up and reinstalled. Getting lots closer today was a good day. Hopefully ill be able to fire it by sunday for a short period. But i am waiting for driveline to get finished. Hopefully by friday.

[oneshotkyle]

Plucking along day after day. Today i went to oriellys and bought a batch of radiator hoses, 3 different times ha. And i found exact fits in gates. 23184 for the upper and gates 21668 for lower. I am running a factory style 68c10 radiator and the engine is gen iv family truck. I got tired of looking through mutiple post here and all over the net with mixedreviews and gobble degoo.

[oneshotkyle]

Then i topped the coolant off with dexcool and fired the truck up. All for about 2 seconds and it died. Lol. Then i realized it puked out the tailshaft cause i havent got deiveline done yet