TX WTB 67-72 Radio, Factory Jack, Chrome 4x4 Hub Rings

[kna4977]

Doing a frame-off OE restoration on a 1972 and looking for the following:

1) Really nice original complete and working AM radio. I need a speaker too but can likely source that aftermarket.

2) Complete Factory Jack Setup

3) NOS or rechromed factory outer 4x4 hub rings

[1rippen6]

I have rechromed hubs with new duals and NOS bolts, washers and o-rings 525 shipped

I posted a jack setup in your other post 150 plus shipping.

I can get pictures of everything,

[kna4977]

Originally Posted by 1rippen6

I have rechromed hubs with new duals and NOS volts, washers and o-rings 525 shipped

I posted a jack setup in your other post 150 plus shipping.

I can get pictures of everything,

Just need the rechromed hub rings and not the other items.

I saw the jack setup in the other post. It looks to be missing the hold down bracket. I need a complete one that includes the hold down bracket.

[1rippen6]

This is the one for the jack handle and lug wrench. If you are looking for the one the jack, I may have the bracket but no spring. Just a FYI, you posted in the truck side there is a blazer side also.

I what to keep the lockout set as a bundle sorry.

[kna4977]

Originally Posted by 1rippen6

This is the one for the jack handle and lug wrench. If you are looking for the one the jack, I may have the bracket but no spring. Just a FYI, you posted in the truck side there is a blazer side also.

I what to keep the lockout set as a bundle sorry.

The jacks for all the trucks are the same pieces from what I can tell. I have those pieces in the pic above. I'm referring to the bracket that actually holds down the jack to the floor. In a Blazer/Jimmy it mounts under the spare tire mount in the rear. Like in the first pic in this thread. https://67-72chevytrucks.com/vboard/...20&postcount=3

I have the jack and tool retention springs that go behind the front drivers seat. I need the jack, jack handle, wheel lug wrench, jack hold down bracket and retention spring.

[1rippen6]

Pics on case you change your mind.

[kna4977]

Anyone have a complete working radio with good chrome?

[MikeCofield]

I have a few factory restored speakers . $150 each shipped

[hooverfish]

Originally Posted by kna4977

Anyone have a complete working radio with good chrome?

I have one super nice faceplate, super condition, tested, etc.
PM your phone # and I will send pictures and price.

[kna4977]

Originally Posted by 72ironmike

I have about 6 sets of hub rings just like the ones Dwayne pictured. I just need to get to storage.

Well....get to it lol

[1970cstblazer]

Originally Posted by kna4977

The jacks for all the trucks are the same pieces from what I can tell. I have those pieces in the pic above. I'm referring to the bracket that actually holds down the jack to the floor. In a Blazer/Jimmy it mounts under the spare tire mount in the rear. Like in the first pic in this thread. https://67-72chevytrucks.com/vboard/...20&postcount=3

I have the jack and tool retention springs that go behind the front drivers seat. I need the jack, jack handle, wheel lug wrench, jack hold down bracket and retention spring.

Example of what the OP is looking for for clarity. I do not have these parts.