Disc Brake Kits Cheap? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BadBowtie · 08-26-2004, 02:30 AM

Who carries a good set of inexpensive disc conversion kit for a 67' 6-lug. I would like a kit that i wouldn't need to do a lot of modifing if possible. Also has anyone ever put a mustang II front end on a 67 or a corvette front suspsion if so haw hard and pics would be nice.

wink_tim · 08-26-2004, 04:17 PM

I bought spindles from GMC Pauls and adapter brake lines from Early Classic Enterprises, the rest of the parts (calipers, rotors, etc.) were all 72 stuff I had layin around. The spindles are made so you can retain your factory ball joints and tie rod ends. This was about the cheapest and easiest way I could come up with at the time.

08-26-2004, 02:30 AM	#1
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	Disc Brake Kits Cheap? Who carries a good set of inexpensive disc conversion kit for a 67' 6-lug. I would like a kit that i wouldn't need to do a lot of modifing if possible. Also has anyone ever put a mustang II front end on a 67 or a corvette front suspsion if so haw hard and pics would be nice.

08-26-2004, 04:17 PM	#2
wink_tim Registered User Join Date: Jun 2003 Location: Rowlett, TX Posts: 120	I bought spindles from GMC Pauls and adapter brake lines from Early Classic Enterprises, the rest of the parts (calipers, rotors, etc.) were all 72 stuff I had layin around. The spindles are made so you can retain your factory ball joints and tie rod ends. This was about the cheapest and easiest way I could come up with at the time. __________________ 67 SWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.