|
09-29-2024, 10:41 AM
|
#1 |
|
Senior Member
 Join Date: Jul 2006
Location: Midlothian TX
Posts: 481
|
No hazard lights
1972 have signal lights but no 4-way flashers. Any ideas where to start how to fix?
|
|
|
|
09-29-2024, 03:36 PM
|
#2 |
|
Registered User
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,611
|
Re: No hazard lights
A lot of times, the 4-way flashers have a separate flash unit. Looks similar to the normal turn signal one. Swap one for the other and see if the problem moves as well.
|
|
|
|
|
10-13-2024, 01:28 PM
|
#3 | |
|
Senior Member
Join Date: Jul 2006
Location: Midlothian TX
Posts: 481
|
Re: No hazard lights
Quote:
|
|
|
|
|
|
10-13-2024, 03:03 PM
|
#4 |
|
Registered User
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,842
|
Re: No hazard lights
Any time there is a failure of an electrical item, the first thing to check is the fuse(s).. In this case, the hazard flashers have their own fuse, separate from the turn signals. If the hazard fuse is good, suspect the turn signal switch.. If the fuse is blown, suspect a short in the circuit somewhere.
|
|
|
|
|
10-13-2024, 03:48 PM
|
#5 | |
|
Senior Member
Join Date: Jul 2006
Location: Midlothian TX
Posts: 481
|
Re: No hazard lights
Quote:
|
|
|
|
|
|
10-13-2024, 04:03 PM
|
#6 | |
|
Registered User
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,842
|
Re: No hazard lights
Quote:
|
|
|
|
|
|
10-13-2024, 04:18 PM
|
#7 |
|
Registered User
Join Date: Dec 2017
Location: Elkhart, Texas
Posts: 1,842
|
Re: No hazard lights
I sent you a PM..
|
|
|
|
|
10-15-2024, 08:35 PM
|
#8 |
|
Msgt USAF Ret
 
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,718
|
Re: No hazard lights
If you look at the home page of the electrical forum and find the heading "electrical forum Faqs by Vettevet", then click on it and scroll down to the Heading ", Why won'?"t my turn signals work?" You will get the answer you need.
You need to find the middle wire in the harness plug which should be a brown wire. Then check it for 12 volts with the key off or on. If you don't get 12 volts then your hazards will not work and if you do then the problem is in the signal switch. The second post will tell you how all the wires are run and what they do.
__________________
VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative. |
|
|
|
|
10-19-2024, 11:01 AM
|
#9 | |
|
Senior Member
Join Date: Jul 2006
Location: Midlothian TX
Posts: 481
|
Re: No hazard lights
Quote:
Last edited by kna4977; 10-19-2024 at 01:34 PM. |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
