Best complete high hump floor pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Rg500gamma** · 10-29-2024, 03:04 PM

After looking at countless YouTube floor replacement videos and one stated to stay away from the LMC replacement floor. So, I figured I would ask the members on here what they consider the best and closest to OEM floor to go with.
Thanks ahead for all your opinions

LS short box · 10-29-2024, 04:09 PM

Afraid I'm not much help but I bought the high hump from a vendor on this site. I'm betting they are all sourced from the same over seas supplier.
I don't recall having any big issues with the install. I bolted mine in and used caulk material to seal it to the floor.
I had to add the high hump because I was running a T56 magnum.
Pic after insulation installed.

franken · 10-29-2024, 04:34 PM

LMC, like most doesn't make anything so saying not to buy their stuff is meaningless. All of the places you buy body parts from sell stuff made in Asia by who knows who. There are not very many manufacturers and you have little chance of knowing who made a part and if it's any better than another. AMD claims to make some parts but it's hard to say if they do.

best view · 10-29-2024, 05:24 PM

I’ve never had a bad experience with lmc

**Orefactory4x4 swb** · 10-29-2024, 07:26 PM

I bought my full high hump from lmc and was pleased with it. A little banging around hear and there.

**Jason Banks** · 10-29-2024, 07:44 PM

Here's a thread about floors - https://67-72chevytrucks.com/vboard/...d.php?t=848263

I do recall hearing something about the LMC floors having some problem. But, there is someone in that thread that said the LMC worked good for them.

**Jason Banks** · 10-29-2024, 07:46 PM

You should consider gmcpauls.com

He's a board supporter and will tell you what he knows about the different floors, and tries to only sell ones he knows are good....

**Rg500gamma** · Yesterday, 09:57 AM

I saw GMC Paul's site and did see AMD and KEY stampings available
I am going to have a look at the above thread
I appreciate the help from you guys and will keep on top of other members comments. KNOWLEDGE IS GOOD !
Also help me from screwing up and redoing the floor

**Orefactory4x4 swb** · Yesterday, 09:26 PM

Nice, I can tell you this, which i learned on here. Get lots of measurements before cutting out old oe. And some good bracing, I did mine and it went pretty good for me.

10-29-2024, 03:04 PM	#1
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 39	Best complete high hump floor pan After looking at countless YouTube floor replacement videos and one stated to stay away from the LMC replacement floor. So, I figured I would ask the members on here what they consider the best and closest to OEM floor to go with. Thanks ahead for all your opinions

10-29-2024, 04:09 PM	#2
LS short box Registered User Join Date: Jun 2015 Location: Carlos MN Posts: 2,090	Re: Best complete high hump floor pan Afraid I'm not much help but I bought the high hump from a vendor on this site. I'm betting they are all sourced from the same over seas supplier. I don't recall having any big issues with the install. I bolted mine in and used caulk material to seal it to the floor. I had to add the high hump because I was running a T56 magnum. Pic after insulation installed. Attached Images

10-29-2024, 04:34 PM	#3
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,100	Re: Best complete high hump floor pan LMC, like most doesn't make anything so saying not to buy their stuff is meaningless. All of the places you buy body parts from sell stuff made in Asia by who knows who. There are not very many manufacturers and you have little chance of knowing who made a part and if it's any better than another. AMD claims to make some parts but it's hard to say if they do.

10-29-2024, 05:24 PM	#4
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,115	Re: Best complete high hump floor pan I’ve never had a bad experience with lmc

10-29-2024, 07:26 PM	#5
Orefactory4x4 swb Active Member Join Date: Mar 2023 Location: Springfield oregon Posts: 178	Re: Best complete high hump floor pan I bought my full high hump from lmc and was pleased with it. A little banging around hear and there.

10-29-2024, 07:44 PM	#6
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,606	Re: Best complete high hump floor pan Here's a thread about floors - https://67-72chevytrucks.com/vboard/...d.php?t=848263 I do recall hearing something about the LMC floors having some problem. But, there is someone in that thread that said the LMC worked good for them. Last edited by Jason Banks; 10-29-2024 at 07:50 PM.

10-29-2024, 07:46 PM	#7
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,606	Re: Best complete high hump floor pan You should consider gmcpauls.com He's a board supporter and will tell you what he knows about the different floors, and tries to only sell ones he knows are good....

Yesterday, 09:57 AM	#8
Rg500gamma Junior Member Join Date: Jul 2023 Location: Warwick ny Posts: 39	Re: Best complete high hump floor pan I saw GMC Paul's site and did see AMD and KEY stampings available I am going to have a look at the above thread I appreciate the help from you guys and will keep on top of other members comments. KNOWLEDGE IS GOOD ! Also help me from screwing up and redoing the floor

Yesterday, 09:26 PM	#9
Orefactory4x4 swb Active Member Join Date: Mar 2023 Location: Springfield oregon Posts: 178	Re: Best complete high hump floor pan Nice, I can tell you this, which i learned on here. Get lots of measurements before cutting out old oe. And some good bracing, I did mine and it went pretty good for me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.