55.2-59 Ashtray assembly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 11-03-2024, 01:26 PM

I am looking for a complete ashtray assembly for my 55 Cameo. I'm putting the Vintage Air heat switch in it if I can find one. Here is a picture of what I'm doing, sorry, you'll have to click the link as I'm having "picture posting problems" right now. https://flic.kr/p/2qrSXwM

I need the complete assembly to put it where the old heater control goes.
Thanks.

**mr48chev** · 11-03-2024, 11:11 PM

Are you sure you aren't looking for a heater delete plate? Heaters were still optional in TF trucks although probably less got sold without one than AD trucks did.

This one is too rich for my blood https://www.ebay.com/itm/166167528919

This one is junk https://www.ebay.com/itm/27585578832...IAAOSwbPtkZG~G

**8man** · Yesterday, 08:24 AM

Mr48, I put one of the AC controls in the ashtray in the stock location. I like the "hidden" aspect of that.

Now I need to put in one more controller and I wanted to put it in the heater spot by converting it to the same flip out as the stock ashtray. That's why I was looking for a complete ashtray assembly.

If I can't find that I'll go with the heater delete and put that last controller in the glove box.

Thanks for the two you sent. The one is too expensive, but if I had to rebuild the other one, it might work.

57tailgater · Yesterday, 02:02 PM

Neat idea. Are you needing just the ash tray or that and the surrounding area it pivots on too? I imagine there's someone around that's smoothing out their dash that cut this out and would have that available. Hopefully your fingers will fit down in there!

**8man** · Yesterday, 06:02 PM

57, thanks, and with the switch placed pretty high as shown, the fingers work fine.

**Hcb3200** · Yesterday, 10:40 PM

Can you confirm Chevy vs gmc. Which one you need

**8man** · Today, 08:25 AM

It is a Chevy.

Thanks for helping clarify that.

11-03-2024, 01:26 PM	#1
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,356	Ashtray assembly I am looking for a complete ashtray assembly for my 55 Cameo. I'm putting the Vintage Air heat switch in it if I can find one. Here is a picture of what I'm doing, sorry, you'll have to click the link as I'm having "picture posting problems" right now. https://flic.kr/p/2qrSXwM I need the complete assembly to put it where the old heater control goes. Thanks. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

11-03-2024, 11:11 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,635	Re: Ashtray assembly Are you sure you aren't looking for a heater delete plate? Heaters were still optional in TF trucks although probably less got sold without one than AD trucks did. This one is too rich for my blood https://www.ebay.com/itm/166167528919 This one is junk https://www.ebay.com/itm/27585578832...IAAOSwbPtkZG~G __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

Yesterday, 08:24 AM	#3
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,356	Re: Ashtray assembly Mr48, I put one of the AC controls in the ashtray in the stock location. I like the "hidden" aspect of that. Now I need to put in one more controller and I wanted to put it in the heater spot by converting it to the same flip out as the stock ashtray. That's why I was looking for a complete ashtray assembly. If I can't find that I'll go with the heater delete and put that last controller in the glove box. Thanks for the two you sent. The one is too expensive, but if I had to rebuild the other one, it might work. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

Yesterday, 02:02 PM	#4
57tailgater Registered User Join Date: Nov 2011 Location: Middle Georgia Posts: 302	Re: Ashtray assembly Neat idea. Are you needing just the ash tray or that and the surrounding area it pivots on too? I imagine there's someone around that's smoothing out their dash that cut this out and would have that available. Hopefully your fingers will fit down in there!

Yesterday, 06:02 PM	#5
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,356	Re: Ashtray assembly 57, thanks, and with the switch placed pretty high as shown, the fingers work fine. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

Yesterday, 10:40 PM	#6
Hcb3200 Senior Member Join Date: Apr 2017 Location: Suwanee GA Posts: 257	Re: Ashtray assembly Can you confirm Chevy vs gmc. Which one you need

Today, 08:25 AM	#7
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,356	Re: Ashtray assembly It is a Chevy. Thanks for helping clarify that. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.