Harness connector help - 66 C10/C20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JPTL** · Today, 12:24 PM

I'm replacing the tail light harness from LMC that has a female 3 wire plug connector (pic 1). This plugs into the intermediate harness that runs along the inside of the left frame rail from the firewall.
The intermediate harness must have had a 3 wire male plug connector (pic 2), but that connector is long gone.
I don't want to replace the intermediate harness since the original is in decent shape - except for the missing connector.
Any idea where I can get a male 3 wire connector like the one pictured (pic 2)?

**MikeB** · Today, 03:31 PM

You might want to check with American Autowire and Painless. Or if originality isn't a concern, use a pair of Weatherpak connectors.

https://www.amazon.com/Fastronix-Pin...0051PLP3U?th=1

**JPTL** · Today, 05:55 PM

Quote:

Originally Posted by MikeB

...... if originality isn't a concern, use a pair of Weatherpak connectors.
[/url]

Originality isn't a concern. Integrity of the connections is.
Great suggestion👍🏼

Today, 12:24 PM	#1
JPTL Junior Member Join Date: Jan 2023 Location: Catlett, VA Posts: 21	Harness connector help - 66 C10/C20 I'm replacing the tail light harness from LMC that has a female 3 wire plug connector (pic 1). This plugs into the intermediate harness that runs along the inside of the left frame rail from the firewall. The intermediate harness must have had a 3 wire male plug connector (pic 2), but that connector is long gone. I don't want to replace the intermediate harness since the original is in decent shape - except for the missing connector. Any idea where I can get a male 3 wire connector like the one pictured (pic 2)? Attached Images __________________ '66 C20 Custom Cab - Factory AC AZ truck

Today, 03:31 PM	#2
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,577	Re: Harness connector help - 66 C10/C20 You might want to check with American Autowire and Painless. Or if originality isn't a concern, use a pair of Weatherpak connectors. https://www.amazon.com/Fastronix-Pin...0051PLP3U?th=1 __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.