Will the heater line fitting I need be standard? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 08-26-2004, 05:16 PM

Here is a pic of an odd setup that is on my Blazer that I want to replace with the correct fitting. If I go to the parts store, do I need to know anything specific or just tell them I need a fitting to thread into the intake for the heater hose - I can always pull the existing one if necessary to take to the parts store.

mikeoj · 08-26-2004, 08:19 PM

Take the "T" fitting out of your manifold.Then just use the short fitting,with the barb on,in your manifold(the fitting that's pointing to the back now).That would be the stock set-up.Mike

*racedvl* · 08-26-2004, 09:49 PM

Bone yard is full of them things. . . ANd if you look pitiful enuff, they would prob. give it to ya. . .

BtnkBndt · 08-26-2004, 09:52 PM

They got nice clean new ones in the HELP stuff at the parts store.

Tx Firefighter · 08-26-2004, 09:53 PM

That's 1/2 inch NPT threads with a 5/8 size hose bung.

A real good parts guy will hook you up without raping you with one of those blister packed deals.

Bobalouie · 08-27-2004, 09:13 AM

If it is a 1/2 NPT/Barb, you should be able to get a nice pretty brass one at Lowe's or Home Depot.

**Yukon Jack** · 08-27-2004, 09:54 AM

Thanks guys. Bought a ton of stuff yesterday to start reviving the 70 K5 that hasn't ran in about 7 years.

08-26-2004, 05:16 PM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Will the heater line fitting I need be standard? Here is a pic of an odd setup that is on my Blazer that I want to replace with the correct fitting. If I go to the parts store, do I need to know anything specific or just tell them I need a fitting to thread into the intake for the heater hose - I can always pull the existing one if necessary to take to the parts store. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-26-2004, 08:19 PM	#2
mikeoj Senior Member Join Date: Nov 2000 Location: WI,USA Posts: 495	Take the "T" fitting out of your manifold.Then just use the short fitting,with the barb on,in your manifold(the fitting that's pointing to the back now).That would be the stock set-up.Mike __________________ 69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc.

08-26-2004, 09:52 PM	#4
BtnkBndt Pennyless Fool Join Date: Oct 2003 Location: Forney,Tx Posts: 439	They got nice clean new ones in the HELP stuff at the parts store. __________________ "Who owns this car with the peace sign, the mag wheels, and four on the floor?" 67 Short Step 283/TH400/4.11

08-26-2004, 09:53 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	That's 1/2 inch NPT threads with a 5/8 size hose bung. A real good parts guy will hook you up without raping you with one of those blister packed deals. __________________ I'm on the Instagram- @Gearhead_Kevin

08-27-2004, 09:13 AM	#6
Bobalouie Fetzer Valve Technician Join Date: Jun 2003 Location: Stillwater, OK Posts: 205	If it is a 1/2 NPT/Barb, you should be able to get a nice pretty brass one at Lowe's or Home Depot. __________________ 1972 Chevy K10 SWB

08-26-2004, 09:49 PM	#3
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Bone yard is full of them things. . . ANd if you look pitiful enuff, they would prob. give it to ya. . .

08-27-2004, 09:54 AM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Thanks guys. Bought a ton of stuff yesterday to start reviving the 70 K5 that hasn't ran in about 7 years. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.