Axle and brake help

[Kalums]

Well... Got an update for everyone..... Found "the leak". BOTH the brand new wheel cylinders were leaking, but also holding the fluid inside the outer rubber gaskets *rolls eyes*I've never seen that before, much less heard of it happening. When I vacuum bled the system it was pulling air past the pistons and seals, but wouldn't build enough pressure to push brake fluid past the outer seal into the brake/drum area. So Napa is replacing both wheel cylinders in the morning (of course I get to do the labor and all new seals on my full float axle *facepalm*.... Thx for the help everyone, hopefully this will fix it, gonna do Speedi-sleeves on the spindles while I'm at it. 👍